Abstract:Abstract The intrinsic characteristics of the monolithic crystal detector are spatially inconsistent, which leads to the position dependence of the detector on the energy response of the γ-ray as well as the peak shift of the response spectrum of the detector, that is, the “position-energy” shift. The “position-energy” shift will cause the energy resolution of the detector to deteriorate and affect the energy linearity of the detector. Thus, a crucial challenge in enhancing the position consistency of detector energy response, improving energy resolution, and ensuring accurate isotope identification is the reduction or elimination of this “position-energy” offset. The “position-energy” response correction method is proposed in this paper to improve the position consistency of detector energy response. Firstly, Monte Carlo simulation is used to model monolithic LaBr 3 (Ce) crystal detectors of different sizes. Secondly, the effective detection region of the detector model is evenly divided into 25 blocks, then the spectral peak position of each incident region is extracted, and the spectral peak correction function matrix of 25 incident regions and the center position is established. Finally, 25 incident regional peaks are modified according to the modified function matrix, so that the spectral peaks in each region are consistent with the peaks in the center, and the modified spectral responses of the detector are obtained. The simulation results show that this method can effectively solve the “position-energy” migration problem of monolithic crystal detectors of different sizes and improve the peak consistency of each detector region. The energy resolution of the 662 keV characteristic peak of the Cs-137 point source can be improved from 4.5% to 3.9%, and the linear deviation of energy can be reduced from 2.1% to 1.2%.

Incident Position Dependence of the Energy Response of CsI(Tl) to Charged Particle

Precise Monte Carlo simulation of gamma-ray response functions for an NaI(Tl) detector

A study on “position-energy” response correction method based on monolithic crystal coupled SiPM array

The Energy Lose and Light Output Response of a Position-Sensitive CsI(T1) Detector to Heavy Ions in Intermediate Energy

Monte Carlo Simulation of CsI(Tl) Scintillator Detector with GEANT4 ToolKit

Study on the performance of a large-size CsI detector for high energy γ -rays

A Real-Time Energy Response Correction Method for Cs3Cu2I5:Tl Scintillating Dosimeter

Monte Carlo Simulations of the Energy Response of Γ-Ray Dosimeters with CdZnTe Semiconductor Detectors

Investigation On Collision Of Si2+ With H From Intermediate To High Projectile Energies

A Detailed Study Of The Interaction Mechanisms For Si(Li) Detector Response Functions By The Direct Monte-Carlo Approach

Study on gamma response function of EJ301 organic liquid scintillator with GEANT4 and FLUKA

Energy Calibration of CsI(Tl) Crystal for Quenching Factor Measurement in Dark Matter Search

Two annular CsI(Tl) detector arrays for the charged particle telescopes

Development of a large NaI(Tl) detection system

Comparative Study of NaI,BGO,LSO,GSO and YSO Scintillators Using Monte Carlo Simulations

Property Investigation of the Wedge-Shaped CsI(Tl) Crystals for a Charged-Particle Telescope

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

MONTE CARLO CALCULATION AND COMPARISON OF GAMMA/NEUTRON DISCRIMINABILITY OF SOME SCINTILLATORS

Measurement of Quenching Factor for Nuclear Recoils in CsI(Tl) Crystal

Nuclear Counter Effect of Silicon Photodiode Used in Csi(Tl) Crystal Calorimeter

Measurement of the high energy $γ$-rays from heavy ion reactions using Čerenkov detector