Abstract:The applicability of mesoscopic models plays an important role in studying the mesoscopic mechanical properties of concrete. In this study, the computerized tomography (CT) test of concrete under uniaxial compression conditions is conducted using a portable dynamic loading equipment developed by Xi’an University of Technology and a medical Marconi M8000 spiral CT scanner. On the basis of damage partition theory, a probabilistic statistical method for determining threshold values is proposed, and a CT test images is obtained and divided into aggregate, hardened cement and hole-crack areas. A ‘structural random numerical concrete model’ is also established on the basis of the coordinates of each pixel unit in CT images. Uniaxial static compression and tensile numerical simulation tests are conducted. Results show that the structural random numerical concrete model can not only reflect the microscopic composition of concrete but also the interfacial transition zone (ITZ) between aggregate and mortar. The ITZ thickness is approximately 0.04 mm, which is close to the real concrete sample ITZ thickness (approximately 10–50 μm). In the two tests, the specimen damage starts from the initial defects, and the damage crack expands through the weaker ITZ around the aggregate. No matter under the action of static tension or compression load, the damage cracks of the sample almost never pass through the aggregate. Most of the many cracks in uniaxial compression are shear cracks. However, many cracks form at the beginning of uniaxial tension, and only one main crack, which is roughly perpendicular to the loading direction, exists in the end.

Interfacial Spring Element Model with Random Defects for 3D Simulation of Concrete Strength under Uniaxial Tension

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Mechanical properties and numerical simulation of crack interface in reinforced concrete

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Simulation of Meso-Fracture for Concrete Based on the Developed Random Aggregate Model

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Numerical simulation study of fracture of concrete materials using random aggregate model

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Effect of Initial Defects on Mesoscopic Simulation of Quasi-Brittle Behavior of Concrete

Failure process simulation of concrete structures by discrete element method

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

THREE-DIMENSIONAL MESO-SCALE COHESIVE FRACTURE MODELING OF CONCRETE USING A PYTHON SCRIPT IN ABAQUS

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

Numerical simulation of high-strength concrete under uniaxial/triaxial compression based on meso-scale model

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model

New concrete cracking model established based on fracture mechanics and damage theory

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Mesoscopic modeling and simulation of tensile properties of cracked concrete using cohesive model

Numerical Reconstruction Model and Simulation Study of Concrete Based on Damaged Partition Theory and CT Number