Abstract:Experiments of vertical water entry for a cylinder with different inclined angles are performed at a low Froude number to investigate the cavity evolution and hydrodynamics. Unique phenomena of double cavities and separated cavity are observed. The accurate trajectories and attitude angles for the inclined cylinders are proposed, which are extracted by utilizing the method of digital image correlation from the image sequence recorded by a high-speed camera. The raw data of trajectory and attitude angle are fitted using the method of quintic smoothing spline, with which, the velocity and acceleration of the cylinders during water entry are estimated, and the cylinder characteristics of motion and hydrodynamic force are studied. The experimental results demonstrate that the unique cavity phenomena are observed for the inclined cylinder during water entry, such as cavity separation and double cavities. The acceleration increases quickly after the cylinder penetrates into water and achieves the maximum value after cavity separation occurs. After that, the acceleration decreases quickly and tends to zero. The vertical velocity of the cylinder with a large initial inclined angle decreases faster than that with a small inclined angle, while the corresponding horizontal velocity increases rapidly. The trajectories of the cylinder with different initial inclined angles generally present the characteristics of first moving in the upstream direction and then in the downstream direction. With respect to the properties of inclined angle, the angular acceleration responds very quickly to the hydrodynamic force, and it generally first increases and then decreases. In addition, the angular speed of cylinder for a large initial inclined angle increases faster than that for a small inclined angle. The inclined angle shows the same trend as well. The cylinder drag and lift coefficients rapidly increase after the cylinder enters the water, and then slowly increase after the cavity pinches off. Moreover, the force coefficients increase more quickly for the cylinder with a large initial inclined angle.

Investigation on Influence of Launch Depth to the Hydrodynamic Characteristics of the Cylinder out of the Tube

Numerical Investigation on the Hydrodynamic Characteristics of a Cylinder of Different Head Construction out of Launch Tube

Investigations on the flow characteristics and the structural response of the launch tube during the underwater launching process

Numerical Simulation of the Launching of Underwater Vehicle

Study on Hydrodynamic Characteristics of AUV Launch Process from a Launch Tube

Numerical Simulation Study on the Interaction Between a Gravity Current and Horizontal Cylinders

Research on Lift and Drag in Unsteady Viscous Flow Around Circular Cylinders

Numerical Investigation of an Internal Solitary Wave Interaction with Tandem Horizontal Cylinders

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

Simulation of Flows Around Two Tandem Rotating Cylinders in a Channel Using LB-DF/FD Method

Research on the Effect of Head Type on the Hydrodynamics of Vertical Motion Vehicle Launched by Gas Curtain

An Investigation of Ventilated Cavitating Flow in Vertical Launching of a Missile

Numerical Study on the Vertical Water Exit of A Cylinder with Cavity

Transient interactions between bubbles and a high-speed cylinder in underwater launches: An experimental and numerical study

Aeration Effects on Hydrodynamic Loads of Circular Cylinder’s High-speed Water Entry

Numerical Simulation on Hydrodynamic Characteristics of Submarine Missile in the Vertical Launch Process

Numerical study of vertical water entry of cylinder under the influence of wind and current

Experimental Investigation on Motion Hydrodynamics of Water Entry for Inclined Cylinders

Experimental Study of Jet and Cavity Coupling under Vertical Motion of Underwater Vehicle

Study on Numerical Simulation of Jacket Launching Progress

RESEARCH ON CAVITATION OF VERTICAL LAUNCH SUBMARINE MISSILE