Abstract:The demand for reconfigurable devices for emerging RF and microwave applications has been growing in recent years, with additive manufacturing and photonic thermal treatment presenting new possibilities to supplement conventional fabrication processes to meet this demand. In this paper, we present the realization and analysis of barium–strontium–titanate-(Ba0.5Sr0.5TiO3)-based ferroelectric variable capacitors (varactors), which are additively deposited on top of conventionally fabricated interdigitated capacitors and enhanced by photonic thermal processing. The ferroelectric solution with suspended BST nanoparticles is deposited on the device using an ambient spray pyrolysis method and is sintered at low temperatures using photonic thermal processing by leveraging the high surface-to-volume ratio of the BST nanoparticles. The deposited film is qualitatively characterized using SEM imaging and XRD measurements, while the varactor devices are quantitatively characterized by using high-frequency RF measurements from 300 MHz to 10 GHz under an applied DC bias voltage ranging from 0 V to 50 V. We observe a maximum tunability of 60.6% at 1 GHz under an applied electric field of 25 kV/mm (25 V/μm). These results show promise for the implementation of photonic thermal processing and additive manufacturing as a means to integrate reconfigurable ferroelectric varactors in flexible electronics or tightly packaged on-chip applications, where a limited thermal budget hinders the conventional thermal processing.

Tunable microwave filters based on discrete ferroelectric and semiconductor varactors

Tunable Bandstop Filters Using Bst Varactor Chips

An Electronically Tuned Bandstop Filter Using BST Varactors

BST-Varactor Tunable Dual-Mode Filter Using Variable ${Z}_{C}$ Transmission Line

Tunable microstrip bandpass filter with constant absolute bandwidth using BST varactors and digitally tunable capacitors

Planar Tunable High-Temperature Superconductor Microwave Broadband Phase Shifter with Patterned Ferroelectric Thin Film

BST Varactor Tuned Bandstop Filter with Slotted Ground Structure

Barium Strontium Titanate Thin Film Varactors for Room-Temperature Microwave Device Applications

Tunable Microwave Integrated Circuits Using Bst Thin Film Capacitors With Device Structure Optimization

Ferroelectric Lumped Element Filter/Switch For Microwave Applications

An Intrinsically Switchable Ladder-Type Ferroelectric BST-on-Si Composite FBAR Filter

Design of Continuously Tunable Superconducting Filter with Semiconductor Varactors

Four‐tap Microwave Photonic Filter with Tunable Center Frequency and Reconfigurable Transfer Function

Tunable Multi-Tap Microwave Photonic Filter With Complex Coefficients Using A Dual-Parallel Mach-Zehnder Modulator

Bandwidth and Center Wavelength Tunable Micro-Ring Optical Filter with Vernier Effect by Four Spectrum Combination

Varactor-Based Continuously Tunable Microstrip Bandpass Filters: A Review, Issues and Future Trends

A Compact Tri-Band Microstrip Filter with Independently Tunable Passbands and High Selectivity

Performance and Characterization of Additively Manufactured BST Varactor Enhanced by Photonic Thermal Processing

High-Quality-Factor and Low-Temperature-Dependence SMR FBAR Based on BST Using MOD Method

Recent Progress of (ba,sr)tio 3 Thin Films for Tunable Microwave Devices

Design And Development Of Ferroelectric Tunable Coplanar Waveguide Components For Ku- And K-Band Applications