Abstract:The solvent-free amorphous Mg(BH4)(2) composite was in-situ synthesized by ball milling LiBH4 and MgCl2. It is found that the onset dehydrogenation temperature of the as synthesized composite is 126.9 degrees C, which is roughly 156 degrees C lower than that of pristine Mg(BH4)(2). The activation energy of the amorphous Mg(BH4)(2) and pristine Mg(BH4)(2) for the first dehydrogenation step was calculated as 120.01 kJ/mol and 487.99 kJ/mol, respectively. Hence the kinetics improvement is certified by the lower Ea value of the dehydrogenation process. When adding NbF5 into the composite, the catalyzed composite exhibits better hydrogen storage properties compared to pristine and amorphous Mg(BH4)(2). The catalyzed composite starts to release hydrogen at proximately 120 degrees C with a total capacity of 10.04 wt %. The reversibility of the catalyzed composite is also improved. The capacity of the catalyzed composite at the second cycle is 5.5 wt%. For the third and fourth cycles the catalyzed composite can still liberate 4 wt% H-2. Besides, the onset hydrogen desorption temperature during four cycles are extremely lower than those of pristine and amorphous Mg(BH4)(2). The peaks of the intermediate MgB12H12 is detected by FTIR as the regenerated hydrogenation product in the catalyzed composite. It can be speculated from the detailed analysis that there are mainly three reasons for the improved properties. Firstly, the additive NbF5 is favorable to enhance the hydrogen storage properties by modifying the dehydrogenation path and producing MgF2 and NbB2 as new products. Secondly, the in-situ formation of amorphous Mg(BH4)(2) is likely to improve the dehydrogenation properties of the samples due to its different reactivity comparing to crystal ones. Finally, LiCl can serve as buffer in the composite and thus improve the dehydrogenation properties. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Hydrazine Bisborane As a Promising Material for Chemical Hydrogen Storage

Enhanced Dehydrogenation of Hydrazine Bisborane for Hydrogen Storage

Catalytic Hydrolysis of Ammonia Borane for Chemical Hydrogen Storage

Structural and Thermochemical Investigation of 1,3-bis(λ 4 -boraneyl)-1λ 4 ,3λ 4 -imidazolidine Adduct for Chemical Hydrogen Storage

Nanosheet-like Lithium Borohydride Hydrate with 10 wt% of Hydrogen Release at 70 °C as a Chemical Hydrogen Storage Candidate.

Hydrogen storage ability of hexagonal boron nitride

Li-Na Ternary Amidoborane For Hydrogen Storage: Experimental And First-Principles Study

Combination of Two H-enriched B–N Based Hydrides Towards Improved Dehydrogenation Properties

A Novel Li–Ca–B–H Complex Borohydride: Its Synthesis and Hydrogen Storage Properties

Structural Study on Ammonia Borane for Hydrogen Storage

Destabilization and Regeneration of LiBH4 Using N-containing Hydrocarbon Based Polymers for Hydrogen Storage

Metal B-N-H Hydrogen-Storage Compound: Development and Perspectives

Theoretical study of the synthesis, characterization and hydrogen storage properties of a high-density hydrogen storage material: (CH3NH3)BH4

In-situ Synthesis of Amorphous Mg(BH4)2 and Chloride Composite Modified by NbF5 for Superior Reversible Hydrogen Storage Properties

A First-Principles Simulation of the Metal Borohydride Ammonia Borane Complex (libh4)2(nh3bh3) and the Decomposition Reaction Pathway for Hydrogen Storage

Ammine Bimetallic (na, Zn) Borohydride for Advanced Chemical Hydrogen Storage

Phenyl Introduced Ammonium Borohydride: Synthesis and Reversible Dehydrogenation Properties

Aluminum borohydride–ethylenediamine as a hydrogen storage candidate

Chemical Regeneration of Hydrogen Storage Materials

Prediction Of A Multi-Center Bonded Solid Boron Hydride for Hydrogen Storage

Reversible hydrogen storage and release mechanism of a B2N monolayer: a first-principles insight