Paraffin/polyethylene/graphite composite phase change materials with enhanced thermal conductivity and leakage-proof
Yifei Xie,Yongping Yang,Yu Liu,Shitao Wang,Xuexia Guo,Hai Wang,Dapeng Cao
DOI: https://doi.org/10.1007/s42114-021-00249-6
IF: 11.806
2021-04-06
Advanced Composites and Hybrid Materials
Abstract:Paraffin, as a low-cost organic phase change material (PCM), has the advantage of large latent heat in a phase change but suffers from the disadvantage of poor thermal conductivity and easy leakage. Improving the thermal conductivity and enhancing the leakage-proof of paraffin are significantly important for its large-scale application. In this work, we adopt the convenient melt blending method to prepare the paraffin/high-density polyethylene (HDPE)/expandable graphite (EG) composite PCMs. The results show that HDPE as a packaging medium can restrict the leakage of paraffin efficiently, and the introduction of EG can significantly improve the heat transfer rate of the PCM. By optimizing the ratio of each component, the sample PCM10-5 (HDPE 10 wt%, EG 5 wt%) exhibits the best performance and its thermal conductivity is 0.641 W/(m · K), which is 2.7 times than that of paraffin, and the speed of response to temperature is increased by about 25.9%. It is noted that the paraffin would be leaked completely at 70 °C, while the leakage of PCM10-5 is only 30% owing to the HDPE packaging. The 120 thermal cycles show that the heat loss of PCM10-5 is within 5%, suggesting its high thermal storage stability. The excellent properties of composite PCMs render it broad application potentials in low-temperature thermal management devices.Graphical abstractTheparaffin/HDPE/EG composite phase change materials exhibits enhanced thermalconductivity and leakage-proof properties compared to the matrix, which isattributed to the addition of HDPE as packaging materials and the introductionof EG as conductive fillers.
nanoscience & nanotechnology,materials science, composites