Abstract:Arsenite (As(III)) is more toxic and more difficult to remove from water than arsenate (As(V)). As there is no simple treatment for the efficient removal of As(III), an oxidation step is always necessary to achieve higher removal. However, this leads to a complicated operation and is not cost-effective. To overcome these disadvantage, a novel Fe–Mn binary oxide material which combined the oxidation property of manganese dioxide and the high adsorption features to As(V) of iron oxides, were developed from low cost materials using a simultaneous oxidation and coprecipitation method. The adsorbent was characterized by BET surface areas measurement, powder XRD, SEM, and XPS. The results showed that prepared Fe–Mn binary oxide with a high surface area (265m2g-1) was amorphous. Iron and manganese existed mainly in the oxidation state +III and IV, respectively. Laboratory experiments were carried out to investigate adsorption kinetics, adsorption capacity of the adsorbent and the effect of solution pH values on arsenic removal. Batch experimental results showed that the adsorbent could completely oxidize As(III) to As(V) and was effective for both As(V) and As(III) removal, particularly the As(III). The maximal adsorption capacities of As(V) and As(III) were 0.93mmolg-1 and 1.77mmolg-1, respectively. The results compare favorably with those obtained using other adsorbent. The effects of anions such as SO42-, PO43-, SiO32-, CO32- and humic acid (HA), which possibly exist in natural water, on As(III) removal were also investigated. The results indicated that phosphate was the greatest competitor with arsenic for adsorptive sites on the adsorbent. The presence of sulfate and HA had no significant effect on arsenic removal. The high uptake capability of the Fe–Mn binary oxide makes it potentially attractive adsorbent for the removal of As(III) from aqueous solution.

Preparation and Adsorption Performance of Mesoporous Fe-Ce Binary Oxide for Effective Removal of Arsenite

Facile Inverse Micelle Fabrication of Magnetic Ordered Mesoporous Iron Cerium Bimetal Oxides with Excellent Performance for Arsenic Removal from Water.

Preparation of Fe-Mn bimetal oxide adsorbent and its adsorption characteristics of arsenic

Facile Hydrothermal Synthesis of Nanostructured Hollow Iron-Cerium Alkoxides and Their Superior Arsenic Adsorption Performance.

Arsenate removal from aqueous solutions using magnetic mesoporous iron manganese bimetal oxides

Facile Synthesis of Mesoporous Ce-Fe Bimetal Oxide and Its Enhanced Adsorption of Arsenate from Aqueous Solutions

Adsorption of arsenite on synthetic composite adsorbent with Mg-Al-La-Ce oxides

Preparation and Evaluation of a Novel Fe–Mn Binary Oxide Adsorbent for Effective Arsenite Removal

Mesoporous Cerium Oxide-Anchored Magnetic Polyhedrons Derived from MIL-100(Fe) for Enhanced Removal of Arsenite from Aqueous Solution.

Adsorption Behavior and Mechanism of Arsenic on Mesoporous Silica Modified by Iron-Manganese Binary Oxide (Femnox/sba-15) from Aqueous Systems.

Nanocasted synthesis of ordered mesoporous cerium iron mixed oxide and its excellent performances for As(V) and Cr(VI) removal from aqueous solutions.

Adsorption and removal of arsenite on ordered mesoporous Fe-modified ZrO2

Synthesis and Evaluation of Iron-Containing Ordered Mesoporous Carbon (feomc) for Arsenic Adsorption

Ordered Mesoporous Mno2 As A Synergetic Adsorbent For Effective Arsenic(Iii) Removal

Preparation, Characterization and Application of a Ce–Ti Oxide Adsorbent for Enhanced Removal of Arsenate from Water

Arsenic(V) Removal with a Ce(IV)-doped Iron Oxide Adsorbent.

Adsorption Characteristics of Arsenite and Arsenate on Hydrous Ceric Oxide

Preparation of a spindle -MnO<sub>2</sub>@Fe/Co-MOF-74 for effective adsorption of arsenic from water

Removal of arsenate from aqueous solution by manganese and iron (hydr)oxides coated resin

Adsorption Performance and Its Mechanism of Aqueous As(III) on Polyporous Calcined Oyster Shell-Supported Fe-Mn Binary Oxide.

Adsorption of Arsenate and Arsenite from Aqueous Solutions by Cerium-Loaded Cation Exchange Resin