Production of gasoline components from biomass catalytic hydropyrolysis using zeolite-based bifunctional catalysts
Jing Su,Kai Miao,Yuan Zhao,Tan Li,Zhigang Zhao,Guanqun Luo,Kaige Wang
DOI: https://doi.org/10.1007/s13399-022-02995-z
IF: 4.05
2022-07-28
Biomass Conversion and Biorefinery
Abstract:Catalytic fast pyrolysis (CFP) of biomass is a promising technology that can convert biomass into fuels. To understand how the metal oxides modified HZSM-5 catalysts enhance the formation of desirable hydrocarbons as well as suppress the coke formation during catalytic pyrolysis of lignocellulosic biomass, three types of metal (molybdenum (Mo), gallium (Ga), and tungsten (W)) oxides modified HZSM-5 catalysts were prepared. The activity of the catalysts was evaluated on a micro-reactor system. The effects of the atmosphere, metal oxide types, loading amounts of metal oxide, and catalysis temperature were all discussed. The introduction of hydrogen significantly enhanced the formation of hydrocarbons and decreased the coke formation. The yield of aliphatic products was further increased by 60%, while coke formation was suppressed by 52% using metal oxide-modified HZSM-5. Among these catalysts, HZSM-5 modified by molybdenum oxide obtained the highest hydrocarbon yield of 49.6%. HZSM-5 modified by gallium oxide obtained the highest aliphatic hydrocarbon yield of 30.4%. Compared to the control test using the HZSM-5 catalyst, coke yields were also decreased by 36%, 38%, and 35% for HZSM-5 modified by molybdenum oxide, gallium oxide, and tungsten oxide, respectively. HZSM-5 modified by molybdenum oxide was selected to further investigate the effects of loading amounts, catalysis temperature, and biomass to catalysts ratio.
energy & fuels,engineering, chemical