Abstract:The dual-tracked deep-sea mining vehicles used for sea trials generally cannot meet the demands of large-scale manganese nodules production due to their inadequate load bearing and traction performance. Various seabed mining organizations have gradually started four-tracked mining vehicles as seabed traveling ore collection machines to meet the demand for enhanced tractive performance. A notable challenge encountered is the significant front-rear track effect observed when these vehicles navigate soft-cohesive sediments. Addressing this, our study introduces a novel design concept that involves setting the grouser heights with a deviation between the front and rear tracks, coupled with the development of a traction force-slip rate model inspired by this innovative approach. This model facilitates an in-depth analysis of the front-rear track effect, including phenomena such as deep sinkage and an increase in pitch angle experienced by vehicles on soft-cohesive terrains. It is calculated that the front and rear grouser deviation height of only 2 cm can improve the traction force by 21%. Utilizing the multi-body dynamics (MBD) method, we validated the effectiveness of this grouser height adjustment in mitigating front-rear track effects, demonstrating its potential to reduce sinkage by at least 30 mm and pitch angle by at least 0.3 degrees, thereby guiding the optimization strategy. Finally, through optimization simulation, we present optimized track structural parameter sets suitable for three types of seabed pavement, concluding that for soft silty soil, saturated high cohesive soil, and saturated soft sandy soil, the grouser deviation heights should be approximately 5.3, 4.1, and 2.0 cm, respectively. After applying the optimized track structural parameter sets, traction performance evaluation indexes, such as traction force and the traction force-disturbing area ratio, improved by at least 23.4% and 3.3%, respectively. Meanwhile, static sinkage was reduced by at least 21.4% across the three types of pavements.

Deep-sea slope controlling algorithm of mining vehicle

An Underactuated AUV Tracking Algorithm Based on Backstepping Adaptive Sliding Mode Control

An Integrated Dynamic Model and Optimized Fuzzy Controller for Path Tracking of Deep-Sea Mining Vehicle

Algorithms for dynamic control of a deep-sea mining vehicle based on deep reinforcement learning

A Path Following Controller for Deep-Sea Mining Vehicles Considering Slip Control and Random Resistance Based on Improved Deep Deterministic Policy Gradient

Nonlinear Multi-Body Dynamic Modeling and Coordinated Motion Control Simulation of Deep-Sea Mining System

System Identification and Parameter Self-Tuning Controller on Deep-Sea Mining Vehicle

Research on Fuzzy Controller of Avoiding Obstacle Program Based on Deep Sea Mining Vehicle

Optimization design of unmanned mining truck path tracking controller based on road adhesion coefficient estimation

Trajectory tracking control of autonomous heavy-duty mining dump trucks with uncertain dynamic characteristics

Track shoe structure optimization of deep-sea mining vehicle based on new rheological calculation formulae of sediment

Multi-Body Dynamics Modeling and Straight-Line Travel Simulation of a Four-Tracked Deep-Sea Mining Vehicle on Flat Ground

Adaptive Dynamic Programming Based on Parallel Control Theory for Underwater Vehicles.

Parameter optimization and tractive performance evaluation of tracked miner

Dynamic model-based back-stepping control design for-trajectory tracking of seabed tracked vehicles

Multiparameter Numerical Investigation of Two Types of Moving Interactions Between the Deep-Sea Mining Vehicle Track Plate and Seabed Soil: Digging and Rotating Motions

10.2316/Journal.206.2018.4.206-5007tracking Control Of Nonholonomic Wheeled Mobile Robots On Slopes

Research on adaptive hydraulic drive optimization control of concrete mixing tank truck for open-pit mine

Understanding front-rear track effect of seabed mining vehicle and traction performance optimization

AI-based Dynamic Avoidance in Deep-Sea Mining

Compression–shear coupling rheological constitutive model of the deep-sea sediment