Abstract:Seismic traveltime tomography is a key technique for near-surface velocity model building. Specifically, the wave-equation tomography can correctly handle the first-order diffraction phenomena when the scale of velocity heterogeneity is comparable with the incident wavelength. Although wave-equation-based traveltime inversion can theoretically produce a velocity model with higher resolution compared with ray tomography, the computational cost is much higher which prohibits its implementation for industry-scaled 3-D problems. To address this problem, by introducing the random boundary condition and the discrete Fourier integration, we propose a practical 3-D waveequation first -arrival tomography using the monochromatic gradient inversion scheme. The advantages of the proposed method are: in terms of computational cost and storage space, the proposed method only needs very few memory spaces (i. e., compared with wave-equation forward modeling, only two additional monochromatic wavefields and one image volume are required), and meanwhile, the computational cost is decreased at least by 1/3 (i. e., compared with the wavefield reconstruction scheme, only two wavefield propagations are needed, and no special treatment for numerical boundaries). Besides, the introduction of random boundary conditions further simplifies the modeling algorithm which in turn makes it well suited for GPU (Graphics Processing Unit) acceleration. Theoretically, considering that the major area that may influence the first -order diffraction of seismic waves is usually referred to as the first Fresnel zone, which has a very similar shape to the monochromatic sensitivity kernel calculated with the dominant frequency. On one hand, the monochromatic sensitivity kernel within the first Fresnel zone will be coherently increased because the scattered wavefield caused by random boundaries becomes less spatial correlative. On the other hand, the multi-fold seismic acquisition system makes the sensitivity kernels outside the first Fresnel zone further canceled. Numerical example demonstrates that the smoothed monochromatic gradient contains sufficient low-wavenumber components which are adequate for background velocity inversion. Moreover, a 3-D synthetic data test demonstrates that a high-resolution near-surface velocity model can be inverted using wave-equation traveltime tomography with affordable computer resources. Compared with the traditional wave-equation tomography methods, the proposed method not only reduces the memory requirement remarkably but also significantly increases the computational efficiency. Therefore, it is very promising for dealing with industrial-sized 3-D inverse problems.

Validity of acoustic early‐arrival waveform tomography for near‐surface imaging

Study of Acoustic Tomography Based on Data Assimilation for Shallow Water Environments

Short-range Velocity Field Observation by Coastal Acoustic Tomography

Investigation and Use of Surface-wave Characteristics for Near-surface Applications

Study Of Extracting Group Velocities Of Near-Surface Rayleigh Waves From Ambient Noise

Alternating first-arrival traveltime tomography and waveform inversion for near-surface imaging

Autoencoded Elastic Wave-Equation Traveltime Inversion: Toward Reliable Near-Surface Tomogram

Surface Wave Eikonal Tomography in Heterogeneous Media Using Exploration Data

3D Wave-Equation First-Arrival Tomography Using Monochromatic Traveltime Sensitivity Kernel

Ocean Acoustic Tomography Using Travel-Time Sensitivity Kernel

Adjoint-State Surface Wave Tomography for Azimuthally Anisotropic Media: Eikonal Equation-Based Methods and Incorporation of Surface Topography

Wave-equation First-Arrival Tomography for 3-D Near-Surface Velocity Inversion

Wave-equation Based Travel-time Tomography for First Arrival

Urban Near-Surface Imaging from Ambient Noise Tomography Using Dense Seismic Networks

Cooperative acoustic emission locating with velocity tomography in true triaxial experiment

Imaging Attenuation From Array Analysis of Surface Waves

Background Velocity Model Building by Wave-Equation Reflection Traveltime Tomography

Imaging Complex Structures of the Los Angeles Basin Via Adjoint-State Travel-Time Tomography

Rugged Topography Near-Surface Velocity Inversion Using 3-D Finite-Frequency Tomography

Joint inversion of Love-wave dispersion curves and SH-wave first arrivals for near-surface SH-wave velocity

Data-domain wave equation reflection traveltime tomography