Abstract:Cascaded surge protective devices (SPDs) are chosen to protect sensitive equipment against surge current in electrical and electronic system in the threat of overvoltage caused by lighting.The two-stage cascaded voltage-limiting SPD is a common form and its main voltage-limiting element is the metal oxide varistor (MOV).Subsequent lightning return stroke occurred in natural lightning flashes not only rises very steeply,but also will affect the V-I characteristics of the MOV and the energy coordination of the two stages.Experiments were carried out in this paper to test the V-I characteristics of the MOV under subsequent lightning return stroke.Based on the characteristic changes of the MOV residual voltage,theoretical analysis was carried out on the SPD coordination under subsequent lightning return stroke.The further simulation considered the influences of the SPD coordination under subsequent lightning return stroke,and the experiments were carried out to verify the simulation results.The simulation and experimental results show that the residual voltages of the MOV under subsequent lightning return stroke increase about 6.8%～36.8% compared with which under 8/20 μs impulse current.The subsequent lightning return stroke makes the cascaded SPDs reach better coordination,but also may cause the malfunction of SPD2 and lose protection capacity accordingly.Meanwhile,the SPD combinations,the distance between cascaded SPDs and the type of load also affect the coordination of SPDs under subsequent lightning return stroke.

Experimental Study of Effective Protective Distance of SPD

Effective Protection Distances of Low-Voltage SPD with Different Voltage Protection Levels

Evaluation of the Effective Protection Distance of Low-Voltage Spd to Equipment

Discussions on factors influencing the effective protection distance of SPD to loads

Experimental Study of Protection Measures for Preventing 10 KV Insulated Conductors from Breakage Caused by Lightning Stroke

Effective Protection Distances of SPDs for Household Electrical Appliances

Protection Distance of Surge Protective Devices in Low Voltage Distribution Systems

Discussion on worst distance between spd and protected device

Research on Coordination Between Levels of Voltage-Limiting Low Voltage SPD

Low-voltage SPD Coordination Analysis

Research on Protection Performance of Surge Protective Devices against Electromagnetic Pulse

Experimental Investigation of Discharging Characteristics of Hollow Cathode Surge Protective Gap

Observation and Analysis of Surge Impact Characteristics of Low-voltage Overhead Lines Caused by Natural Lightning

Research on Lightning Surge and Protection of Indoor Wiring

Quantitative Determination Of Response Time And Time-Varying Characteristics Of Surge Protective Devices

The V-I Characteristics of Voltage-Limiting Type SPD and Its Cascaded Coordination under Subsequent Lightning Return Stroke

Surge protective devices efficiency for apparatus protection in front of direct flashes to overhead low voltage lines

Observation of Residual Voltage in Low-Voltage Surge Protective Devices Due to Nearby M-Components

Effects of Electrode Materials and Gap Distance on Protective Characteristics of Gap SPD

Influence on Low-Voltage Surge Protective Devices of Overhead Distribution Lines Due to Nearby Return Strokes

Dynamic Characteristics and Cascaded Coordination of Limiting-Type SPDs under Subsequent Negative Strokes