Abstract:The diagnostic capability of high-resolution optical coherence tomography (OCT) may be enhanced by using extended depth-of-field (EDOF) imaging that retains high transverse resolution over long depths. A recently developed mirror-tunnel optical probe design (single-mode fiber to multimode fiber to lens structure) that generates coaxially focused modes has been previously shown to enable EDOF for endoscopic OCT applications. Here, we present ray-tracing optical modeling of this optical configuration, which has the potential to guide performance improvement through optimization. The Huygens wave propagation of the field was traced through probe components with initial lengths. The irradiance along the x-z plane was analyzed, yielding an average full width at half-maximum (FWHM) of 9 µm over a 640 µm DOF (defined as the axial range over which the beam's transverse FWHM is maintained). A custom merit function was then defined, based on the focal region illumination intensity profile that yielded the maximum possible depth having a constrained FWHM size. An orthogonal gradient descent optimization algorithm was then applied using this merit function, using the multimode fiber, spacer, and lens lengths as variables. Optimization resulted in a modeled mean 6 µm FWHM spot diameter over an EDOF of 1 mm. Following optimization, a probe was fabricated, and was validated using a custom-built near-field scanning pinhole beam profiler. The experimental results (6 µm mean FWHM over 800 µm EDOF) showed reasonable correspondence to the simulated predictions, demonstrating the potential utility of optical modeling and optimization for improving EDOF performance in mirror-tunnel endoscopic OCT probes.

Design Optimization and Implementation of a Miniature Optical Coherence Tomography Probe Based on a MEMS Mirror

Microfabricated Endoscopic Probe Integrated MEMS Micromirror for Optical Coherence Tomography Bioimaging

Development of Fiber-Based Optical Coherence Tomographic Imaging System

MEMS Scanning Micromirror for Optical Coherence Tomography.

A Miniature Endoscopic Optical Coherence Tomography Probe Based on C-Lens

Analysis and Optimization of a Novel Laterally Deformable Optical NEMS Grating Transducer

Swept-source Common-Path Optical Coherence Tomography with a MEMS Endoscopic Imaging Probe

Probes for Endoscopic Optical Coherence Tomography: Minimized Design and Depth of Focus Extension

Optical coherence tomography imaging by a fully integrated MOEMS endomicroscopy probe with Mirau micro-interferometer and two-axis electrothermal micro-scanner using Lissajous trajectory scanning

Modeling, optimization, and validation of an extended-depth-of-field optical coherence tomography probe based on a mirror tunnel

Restricted feeding and human intestinal plasma cell development.

Circumferential-scanning Endoscopic Optical Coherence Tomography Probe Based on a Circular Array of Six 2-Axis MEMS Mirrors.

An endoscopic forward-viewing OCT imaging probe based on a two-axis scanning mems mirror

Endoscopic Optical Coherence Tomography Probe with Large Scan Range

An imaging analysis and reconstruction method for multiple-micro-electro-mechanical system mirrors-based off-centre scanning optical coherence tomography probe

Correction of Image Distortions in Endoscopic Optical Coherence Tomography Based on Two-Axis Scanning MEMS Mirrors

Uniform focusing with an extended depth range and increased working distance for optical coherence tomography by an ultrathin monolith fiber probe.

Tiny Endoscopic Optical Coherence Tomography Probe Driven by a Miniaturized Hollow Ultrasonic Motor

Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application

New Endoscopic Imaging Technology Based on MEMS Sensors and Actuators

Design of an endoscopic OCT probe based on piezoelectric tube with quartered outside electrodes