Abstract:The frequency response of phase-sensitive optical time-domain reflectometry ($\Phi $ -OTDR) is strictly limited by the repetition rate of the injected sampling pulses in conventional sensing scheme. To fully reconstruct an arbitrary vibration signal, the pulse repetition rate is required to be lower bounded by twice the maximum frequency of the vibration signal according to the Nyquist sampling theorem and at the same time upper bounded by the sensing fiber length to avoid generations of mixed Rayleigh backscattered signals from more than one optical pulse within the sensing fiber, making high-frequency vibration sensing over long distance impossible. In this work, we propose a novel method based on the serial multi-coset sampling (MCS) strategy which can recover sparse broadband vibration signals with sub-Nyquist sampling rates, which is thus able to break through the tradeoff between the measurable vibration frequency bandwidth and the sensing range. Pulses with non-uniform intervals are adopted to realize MCS for the Rayleigh backscattered lights along the entire sensing fiber rather than the traditional uniform pulse train. A continuous to finite (CTF) block is used to determine the active spectrum ranges of the sparse signal. By using a serial MCS sequence with an average sampling rate of 4.8 kHz, both a 4 kHz single-frequency sinusoidal signal and a 0.2 kHz bandwidth chirped signal with a center frequency of 4.6 kHz were sampled and recovered successfully in the simulation. In experiments, a single frequency vibration signal of 15 kHz and a chirped vibration signal with frequency ranging from 15 to 16 kHz were successfully identified and reconstructed over a sensing distance of 4 km using an average sampling rate of 21.6kHz, respectively, which however is not possible in conventional $\Phi $ -OTDR system. Furthermore, accurate identification of a broadband vibration signal with a maximum frequency of 6 kHz over a 10km-long sensing fiber shows that this method is also practically valid in long-distance sensing.

Application of Frequency Spectrum Analysis in Measuring Multi-Vibrations by Using Potdr

Pattern Recognition Based on Enhanced Multifeature Parameters for Vibration Events in Φ‐otdr Distributed Optical Fiber Sensing System

Multi-vibration Detection by Probe Pulses with Ergodic SOPs in a POTDR System

Measurement of Multiple Vibration Points by Using POTDR

Development of A Distributed Polarization-Otdr to Measure Two Vibrations with the Same Frequency

Detection of Multiple Vibration Points Using Fundamental Frequency and Harmonic Progressions in Response Spectra of Potdr

The Research Progress of Detecting Multi-Disturbing Events for Polarization Optical Time Domain Reflectometer

Detection of Two Identical Frequency Vibrations by Phase Discrimination in Polarization-Otdr

Development of Distributed Vibration Sensing System Based on Polarization Optical Time Domain Reflectometry

Development of Distributed POTDR with Analyzers of Different SOP Directions

Development of a Multiperimeter Sensing System Based on POTDR

Influence of Optical Pulse Width on the Perturbation Detection Performance of Polarization-Optical Time Domain Reflectometer

Multi-parameter Measurement of a Multi-Point High-Frequency Vibration Signal in an OFDR System

Hybrid B-OTDR/Φ-OTDR for Multi-Parameter Measurement from a Single End of Fiber

A POTDR System Based on Dual Sensing Directions

Broadband Vibration Signal Measurement Based on Multi-Coset Sampling in Phase-Sensitive OTDR System

Space-frequency Analysis with Parallel Computing in a Phase-Sensitive Optical Time-Domain Reflectometer Distributed Sensor.

Amplitude-modulated pulses based phase-sensitive OTDR in distributed sensing

Pattern recognition of fiber disturbance based on support vector machine in polarization optical time domain reflectometry

A new type of POTDR distributed optical fiber sensor

Real-time phase demodulation and data administration of distributed optical fiber vibration sensing system