Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

Design of Balanced Proportional-Integral-Derivative Controllers Based on Bilevel Optimisation

A Proposal on Centralised and Distributed Optimisation Via Proportional-Integral-derivative Controllers (PID) Control Perspective

Robust Pid Controller Design Using Co-Evolutionary Particle Swarm Optimization

Intelligent Optimization Design of PID Controller for Integrating Processes

A Closed-Loop Particle Swarm Optimizer for Multivariable Process Controller Design

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

Multiobjective Optimization for Controller Design

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

Robust Feedback Compensation and PID Tuning under Actuator Rate Limit Effect Based on Bode’s Integrals

Performance assessment and tuning of PID control using TLBO: the single-loop case and PI/P cascade case

Novel Proportional–Integral–Derivative Control Framework on Continuous-Time Positive Systems Using Linear Programming

Robust Proportional–Integral–Derivative (PID) Design for Parameter Uncertain Second-Order Plus Time Delay (SOPTD) Processes Based on Reference Model Approximation

Robust Fine Tuning of Optimal PID Controller With Guaranteed Robustness

PID Control Performance Assessment Using Iterative Convex Programming

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

PID Controller Design Based on Global Optimization Technique with Additional Constraints

PID tuning for improved performance

Desired dynamic equational proportional‐integral‐derivative controller design based on probabilistic robustness

PID control system analysis and design

An Approach for Setting Parameters for Two-Degree-of-Freedom PID Controllers.