Abstract:With regard to frequent accidental chemical release in recent years, a risk assessment system of atmospheric environment and health with immediate response to the emergency incident should be designed in order to reduce the harm and losses. First of all, a widely -used dense gas dispersion model SLAB and one of the best public exposure guidelines AEGLs were briefly introduced. Then on the basis of these recognitions, we have organically combined the SLAB model with AEGLs in the construction of mentioned assessment system . This system can timely and effectively identify the distribution of hazardous zones that could make general public lethal, disabling, nondisabling etc. It is able to work out their corresponding statistics such as maximum half width, maximum depth and area. Furthermore, towards constructing the assessment system, a series of sensitivity tests were performed in terms of mode, species and duration of leakage as well as meteorological conditions (including ambient wind speed, ambient temperature, relative humidity and stability). The analysis showed that, (1) leakage mode, ambient temperature and relative humidity have a little effect on the distribution of hazardous zones; (2) due to the great difference between density and toxicity, different substances cause different distribution of hazardous zones, which mainly depends on the relative contribution of their effects; (3) when the total mass of leakage remains the same and duration of leakage is extended because of source control, total area distribution of hazardous zones can be reduced effectively; (4) strong ambient wind speed or instability will greatly constrict the total area of severe hazardous zones, i. e . lethal and disabling zones. However increasing ambient wind speed or instability produces nonlinear area of non-disabling zones and then it may lead to a wider range of injuries and losses. From these results, we may reasonably conclude that the distributions of hazardous zones are mainly dependent on factors such as species and duration of leakage, ambient wind speed and stability.

Identifying Principle and Method for Atmospheric Environmental Risk Sources

An novel identification method of the environmental risk sources for surface water pollution accidents in chemical industrial parks

Modeling Regional Atmospheric Risks of Petrochemical Park Planning

Development of Risk Assessment System of Atmospheric Environment and Health for Accidental Chemical Release

An identification method for the environmental risk sources of emergency accident

Hierarchy Method for Source Quantification of Atmospheric Environmental Risk Based on Public Health

An integrated risk assessment method for urban areas due to chemical leakage accidents

Systematic Identification Method for Secondary Environmental Risk

Discussion on the Several Problems in Quantitative Risk Analysis of Chemical Industry Park

Real-time environment risk analysis for accident release of hazardous materials around tank area

Analysis on causes of chemical industry accident from 2015 to 2020 in Chinese mainland: A complex network theory approach

A New Method On Risk Assessment Of Dangerous Chemicals

Regional environmental risk assessment for the Nanjing Chemical Industry Park: an analysis based on information-diffusion theory

Formal probabilistic risk analysis of accidental air pollution in a development zone using Bayesian networks

Study on the Classification Method of Environmental Risk for Sudden Accidents in Drinking Water Sources

Assessment and management of accidental environmental risks in the petrochemical industry

Study on simulation and prediction of environmental risk material leakage in an Equipment Manufacturing Industrial Park

Environmental Risk Source Management System for the Petrochemical Industry

Study on Risk Control Platform of Major Hazard Source in Chemical Industrial Park

Classification Method of Urban Industrial Environmental Risk Sources and Its Application

Adjoint Method for Assessment and Reduction of Chemical Risk in Open Spaces