Abstract:Carbon nanotubes (CNT) have been developed in recent decades for nanodevices such as nanoradios, nanogenerators, carbon nanotube field effect transistors (CNTFETs) and so on, indicating that the application of CNTs for nanoscale electronics may play a key role in the development of nanotechnology. Nanorobotics manipulation systems are a promising method for nanodevice construction and assembly. For the purpose of constructing three-dimensional CNTFETs, a nanorobotics manipulation system with 16 DOFs was developed for nanomanipulation of nanometer-scale objects inside the specimen chamber of a scanning electron microscope (SEM). Nanorobotics manipulators are assembled into four units with four DOFs (X-Y-Z-θ) individually. The rotational one is actuated by a picomotor. That means a manipulator has four DOFs including three linear motions in the X, Y, Z directions and a 360-degree rotational one (X-Y-Z-θ stage, θ is along the direction rotating with X or Y axis). Manipulators are actuated by picomotors with better than 30 nm linear resolution and <1 micro-rad rotary resolution. Four vertically installed AFM cantilevers (the axis of the cantilever tip is vertical to the axis of electronic beam of SEM) served as the end-effectors to facilitate the real-time observation of the operations. A series of kinematic derivations of these four manipulators based on the Denavit-Hartenberg (D-H) notation were established. The common working space of the end-effectors is 2.78 mm by 4.39 mm by 6 mm. The manipulation strategy and vision feedback control for multi-manipulators operating inside the SEM chamber were been discussed. Finally, application of the designed nanorobotics manipulation system by successfully testing of the pickup-and-place manipulation of an individual CNT onto four probes was described. The experimental results have shown that carbon nanotubes can be successfully picked up with this nanorobotics manipulation system.

A 3D stick-slip nanopositioner for nanomanipulation

Designing and Dynamic Modeling of 1D Nanopositioner Based on Stick-slip Motion Principle

Design of a SEM Compatible Slip-Stick Nano-Positioner with High Bearing Capacity

A piezodriven three dimensional micropositioning stage for nano-manufacturing

A Novel Monopolar Cross-Scale Nanopositioning Stage Based on Dual Piezoelectric Stick-Slip Driving Principle

Model and Control of a Compact Long-Travel Accurate-Manipulation Platform

A Novel Cross-Scale Nanopositioning Stage Based on Dual Piezoelectric Stick-Slip Actuation with a Shared Flexible Hinge

Low-cost, open-source XYZ nanopositioner for high-precision analytical applications

Development of A Nanomanipualtion System for Handling Nanowires

A 3-DOF piezoelectric driven nanopositioner: Design, control and experiment

A Normal-Stressed Electromagnetic-Driven Stiffness-Tunable Nanopositioner

A Two-Dimensional Nano-Positioner: Design, Modelling and Experiments

A novel piezo-driven nanopositioning mechanism for precise manipulating

Modeling of a 16-DOF Nanorobotics Manipulators for Multitask Inside SEM

Trans‐scale Precision Positioning Stage Without Guideway Based on Inertial Stick–slip Driving

A Stick-Slip Positioning Stage Robust to Load Variations

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Pick-and-place Nanomanipulation with Three-Dimensional Manipulation Force Microscopy

Mechatronic Development and Vision Feedback Control of a Nanorobotics Manipulation System inside SEM for Nanodevice Assembly

A Piezo-Driven Compliant Nanopositioning Stage with Large Stroke for Micro/Nano Manipulation

A Silicon Integrated Micro Nano-Positioning Xy-Stage for Nano-Manipulation