Motion Errors and Compensation for Bistatic Forward-Looking SAR with Cubic-Order Processing
Wei Pu,Junjie Wu,Yulin Huang,Wenchao Li,Zhichao Sun,Jianyu Yang,Haiguang Yang
DOI: https://doi.org/10.1109/tgrs.2016.2592536
IF: 8.2
2016-01-01
IEEE Transactions on Geoscience and Remote Sensing
Abstract:With appropriate geometry configurations, bistatic synthetic aperture radar (SAR) can break through the limitations of monostatic SAR on forward-looking imaging. Owing to such a capability, bistatic forward-looking SAR (BFSAR) has extensive potential applications. In BFSAR, the compensation of the spatially variant motion errors is of great significance to get a well-focused image. In this paper, first, the spatial-variance properties of motion errors are analyzed analytically and quantitatively. Different from the side-looking monostatic and bistatic SAR, 2-D space-variant motion errors should be taken into consideration in BFSAR. The 2-D spatial variance of the motion errors can be categorized into two parts, range-variant motion errors of the transmitter and azimuth-variant motion errors of the receiver. Moreover, these two parts are independent of each other. Based on this property analysis, second, a motion compensation (MoCo) approach with cubic-order processing is proposed to deal with the spatially variant motion errors in BFSAR. In the cubic-order processing, the first-order MoCo is performed to correct the spatially independent motion errors on the raw data. The second-order MoCo is accomplished on the non-range-cell-migration (RCM) data to deal with the range-variant errors. After the second-order MoCo, since the signal direction of the non-RCM data coincides with the variant direction of the uncompensated phase errors, the azimuth-variant motion errors and slow time signal are coupled together. To cope with such a problem, the slow time signal is transformed into the direction perpendicular to the azimuth by a novel procedure named azimuth-slow time decoupling. At this stage, the coupling between the azimuth-variant motion errors and slow time signal has been eliminated. Azimuth-variant motion errors can be corrected precisely. Simulation and experimental results verify the effectiveness of the proposed method.