Abstract:This work presents a dynamic modeling approach for analyzing the behavior of a bi-material cantilever actuator structure, consisting of a strip of filter paper bonded to a strip of tape. The actuator’s response is induced by a mismatch strain generated upon wetting, leading to the bending of the cantilever. The study delves into a comprehensive exploration of the dynamic deflection characteristics of the bilayer structure. It untangles the intricate connections among the saturation, modulus, hygro-expansion strain, and deflection, while uniquely addressing the challenges stemming from fluid–structure coupling. To solve the coupled fluid–solid differential equations, a combined numerical method is employed. This involves the application of the Highly Simplified Marker and Cell (HSMAC) technique for fluid flow analysis and the Finite Difference Method (FDM) for response deflection computation. In terms of the capillary flow model, the Computational Fluid Dynamics (CFD) simulations closely align with the classical Washburn relationship, depicting the wetted front’s evolution over time. Furthermore, the numerical findings demonstrate that heightened saturation levels trigger an increase in hygro-expansion strain, consequently leading to a rapid rise in response deflection until a static equilibrium is achieved. This phenomenon underscores the pivotal interplay among saturation, hygro-expansion strain, and deflection within the system. Additionally, the actuator’s response sensitivity to material characteristics is highlighted. As the mismatch strain evolving from paper hygro-expansion diminishes, a corresponding reduction in the axial strain causes a decrease in response deflection. The dynamic parameter demonstrates that the deflection response of the bilayer actuator diminishes as dynamic pressure decreases, reaching a minimal level beyond which further changes are negligible. This intricate correlation underscores the device’s responsiveness to specific material traits, offering prospects for precise behavior tuning. The dependence of paper modulus on saturation levels is revealed to significantly influence bilayer actuator deflection. With higher saturation content, the modulus decreases, resulting in amplified deflection. Finally, strong concordance is observed among the present fluidically coupled model, the static model, and empirical data—a testament to the accuracy of the numerical formulation and results presented in this study.

Cantilever snap-fit performance analysis for haptic evaluation

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

A Computationally Efficient Dynamical Model of Fluidic Soft Actuators and Its Experimental Verification

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Visualized External Force/Torque Interaction in Virtual Prototyping Dynamics Analysis

An Analytical Model for Studying the Structural Effects and Optimization of A Capacitive Tactile Sensor Array

A Semi-Analytical Modeling Method for the Static and Dynamic Analysis of Complex Compliant Mechanism

Modeling and Analysis of Multiple Electrostatic Actuators on the Response of Vibrotactile Haptic Device

Anisotropic Vibration Tactile Model and Human Factor Analysis for a Piezoelectric Tactile Feedback Device

Mechanical Model of a Hybrid Non-linear Viscoelastic Material Damping Device With Its Verifications

Peg-in-Hole Revisited: A Generic Force Model for Haptic Assembly

A novel bridge-type compliant displacement amplification mechanism under compound loads based on the topology optimisation of flexure hinge and its application in micro-force sensing

Design, modeling, and evaluation of a slim haptic actuator based on electrorheological fluid

An Improved Analytical Model of a Thrust Stand with a Flexure Hinge Structure Considering Stiffness Drift and Rotation Center Offset

Dynamic Response of Paper-Based Bi-Material Cantilever Actuator

Haptic Assembly and Prototyping: An Expository Review

A hybrid self-centering seismic damper: Finite element modeling and parametric analysis

Design and Characterisation of Multi-cavity, Fluidic Haptic Feedback System for Mechano-tactile Feedback

Experimental and Numerical Analysis of a Novel Assembled Auxetic Structure with Two-Stage Programmable Mechanical Properties

Elastodynamic performance of a spatial redundantly actuated parallel mechanism constrained by two point-contact higher kinematic pairs via a model reduction technique