Abstract:Reaction process and reaction mechanism of grafting GMA on hollow microspheres with silane coupling agent as a reaction platform for making rubber composites. To improve the interfacial bonding between hollow microspheres (RiM01) and natural rubber (NR), the silane coupling agents γ‐aminopropyltriethoxysilane (KH550) and γ‐methacryloyloxypropyltrimethoxysilane (KH570) are used in this study as intermediate reaction platforms for the modification of (RiM01) with glycidyl methacrylate (GMA), respectively. In the process, GMA reacts with KH550 and KH570 through epoxy group ring‐opening and free radical polymerization, respectively. Different NR/RiM01@GMA composites are prepared by a mechanical blending method. The results show that the addition of GMA improves the interfacial bonding between RiM01 and NR, and enhances the vulcanization rate and cross‐linking degree of the rubber composites. When KH550 is used as the reaction platform, the tensile strength of the rubber composites increases by 24% compared to composites with unmodified RiM01, while when KH570 is used, the tensile strength increases by 18%. Additionally, the tear strength and abrasion resistance of the rubber composites increase by 13% and 15%, respectively, when KH570 is used as the reaction platform. At the same time, the filler‐matrix interaction is strongest when KH570 is used as the reaction platform, and the rubber composites exhibit the lowest rolling resistance and the best resistance to heat and oxygen aging. Highlight Modification of hollow microspheres by grafting GMA with KH550 and KH570, respectively. Improvement of rubber composite properties after modification GMA improves the interfacial bonding between hollow microspheres and rubber.

Interfacial Structure and Performance of Rubber/boehmite Nanocomposites Modified by Methacrylic Acid

Styrene–butadiene rubber/halloysite nanotubes nanocomposites modified by methacrylic acid

High-performance rubber/boehmite nanoplatelets composites by judicious in situ interfacial design

Low Permeability Styrene Butadiene Rubber/Boehmite Nanocomposites Modified with Tannic Acid

Constructing Covalent Interface in Rubber/clay Nanocomposite by Combining Structural Modification and Interlamellar Silylation of Montmorillonite.

Morphology, Interfacial Interaction and Properties of Styrene-Butadiene Rubber/Modified Halloysite Nanotube Nanocomposites

Structural and Mechanical Properties of Styrene–butadiene Rubber/silica Composites with an Interface Modified In-Situ Using a Novel Hindered Phenol Antioxidant and Its Samarium Complex

Enhancing Mechanical Properties of Styrene–butadiene Rubber/silica Nanocomposites by in Situ Interfacial Modification with a Novel Rare-Earth Complex

Preparation and properties of styrene-butadiene rubber/silane coupling agent modified boehmite composites

Enhancing Interfacial Interaction and Mechanical Properties of Styrene-Butadiene Rubber Composites Via Silica-Supported Vulcanization Accelerator

Enhancing Performances of Polyamide 66 Short Fiber/Natural Rubber Composites via In Situ Vulcanization Reaction

Effect of silane coupling agent grafted glycidyl methacrylate on hollow microsphere/natural rubber composites

Morphology and Performance of Styrene Butadiene Rubber Filled with Modified Graphite Nanoplatelet and Carbon Black

Combining In-Situ Organic Modification of Montmorillonite and the Latex Compounding Method to Prepare High-Performance Rubber-Montmorillonite Nanocomposites

Interface tailoring of layered silicate/styrene butadiene rubber nanocomposites

A Novel Strategy to Functionalize Styrene Butadiene Rubber Toward Enhanced Interfacial Interaction with Silica

Organic Interfacial Tailoring of Styrene Butadiene Rubber–clay Nanocomposites Prepared by Latex Compounding Method

Composition Effects on Thermodynamic Properties and Interfacial Structure in Styrene-Butadiene Rubber: A Combined Experimental and Simulation Study

Preparation of Crosslinked Nanospheres of α-Methyl Styrene and Acrylonitrile Copolymer and Investigation of Interfacial Interaction between Nanospheres and Rubber

Styrene-butadiene rubber reinforced by nano-calcium carbonate modified in situ with methacrylic acid

Enhanced Mechanical and Processing Property of Styrene-butadiene Rubber Composites with Novel Silica-supported Reactive Processing Additive