Abstract:Carbon coated hollow alpha-Fe2O3 spheres were prepared via a facile two-step hydrothermal method. The appearance and crystalline structure of the samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The morphology showed that the hollow spheres were composed of well crystallized nanoparticles after the first hydrothermal reaction and subsequent calcinations. A thin carbon film was coated on each Fe2O3 nanoparticles after the second hydrothermal procedure. This carbon coating was probably beneficial to maintain the microstructure of the active material during repeatable lithiation and delithiation. Afterwards, the samples were assembled into half-cells to investigate the electrochemical properties. The electrode delivered relatively high initial discharge/charge capacities of 1291/890 mA h g(-1) at the rate of 0.3 C. The reversible capacity maintained very well in a prolonged 140 cycles. The capacity retention was 89% after 70 cycles, and that was 81% after 140 cycles. This exceptional lithium storage property was probably attributed to the porous and hollow structure which allowed the penetration of electrolyte to the inner of the electrode, the nanoscale Fe2O3 particles which shortened the migration pathway for lithium ion, and the carbon coating which kept the active materials structure intact. The attractive electrochemical performance suggested the carbon coated hollow Fe2O3 spheres would be the potential anode material for future lithium ion battery.

Preparation of Lithium Carbonate Hollow Spheres by Spray Pyrolysis

Sustainable Synthesis of N‐Doped Hollow Porous Carbon Spheres Via a Spray‐Drying Method for Lithium‐Sulfur Storage with Ultralong Cycle Life

Diammonium Hydrogen Citrate-Assisted Spray Pyrolysis Synthesis of Nanostructured LiCoPO 4 Microspheres as High-Voltage Cathode Material for Lithium-Ion Batteries

Bulk Mg-doped Spherical Lithium Cobalt Oxide Preparation and Characterization of Precursor

Diammonium Hydrogen Citrate-Assisted Spray Pyrolysis Synthesis of Nanostructured LiCoPO4 Microspheres as High-Voltage Cathode Material for Lithium-Ion Batteries

Synthesis of Sandwich-Like Carbon@Sno2@Carbon Composite Hollow Microspheres with High Rate Capability and Stability for Lithium-Ion Batteries

Synthesis and Characterization of Hollow Alpha-Fe2o3 Spheres with Carbon Coating for Li-Ion Battery

Synthesis of Sandwich-Like Carbon@SnO<sub>2</sub>@Carbon Composite Hollow Microspheres with High Rate Capability and Stability for Lithium-Ion Batteries

SYNTHESIS OF SUB-MICROMETER CARBON SUPPORTED Fe3O4 HOLLOW SPHERES WITH ENHANCED LITHIUM STORAGE PROPERTIES

Synthesis of Micro-Sized Sno2@Carbon Hollow Spheres with Enhanced Lithium Storage Properties

Gas template-assisted spray pyrolysis: A facile strategy to produce porous hollow Co3O4 with tunable porosity for high-performance lithium-ion battery anode materials

Preparation of Monodispersed Carbon Spheres Via Hydrothermal Carbonization of Ascorbic Acid and Their Application in Lithium Ion Batteries

Blackberry-like Hollow Graphene Spheres Synthesized by Spray Drying for High-Performance Lithium-Sulfur Batteries

Porous graphite/silicon micro-sphere prepared by in-situ carbothermal reduction and spray drying for lithium ion batteries

Fabrication of High Tap Density LiFe0.6Mn0.4PO4/C Microspheres by a Double Carbon Coating–spray Drying Method for High Rate Lithium Ion Batteries

Aerosol construction of multi-shelled LiMn2O4 hollow microspheres as a cathode in lithium ion batteries

A novel method to synthesize SnP 2 O 7 spherical particles for lithium-ion battery anode

Copolymerization- Assisted Preparation of Porous Limn2o4 Hollow Microspheres As High Power Cathode of Lithium-Ion Batteries

An Efficient Process to Fabricate Spherical Hierarchical LiFePO4/C Cathode Composites with Controllable Coating Thickness

Cheap and scalable synthesis of α-Fe2O3 multi-shelled hollow spheres as high-performance anode materials for lithium ion batteries.

Controllable Synthesis of Li3po4 Hollow Nanospheres for the Preparation of High Performance Lifepo4 Cathode Material