Abstract:In this study, a transmission line model is applied to the electrochemical impedance spectroscopy (EIS) data of the fabricated dye-sensitized solar cells (DSSCs) to evaluate the charge transfer mechanism through the cells. Natural dye from black plum ( Syzygium cumini ) fruit was used as a cell sensitizer (SC-DSSC) and compared its photovoltaic and electron transport capabilities to those of a cell using a synthetic sensitizer (N719-DSSC). TiO 2 /ZnO electrospun composite nanofibers were used as the semiconductor layer of the photoanode to enhance electron transfer. The EIS analysis revealed the role of electron resistances through shant, interfaces, and electrolyte solution by measuring the electron transfer kinetic parameters of each element. Based on the results, the SC-DSSC and N719-DSSC are appropriate photovoltaic cells because their ratios of effective electron diffusion length to photoanode thickness are 12.5 and 2.8, respectively. The EIS analysis showed that the electrospun composite nanofiber coated on the photoanode reduces the semiconductor layer's electrical resistance to the cell's total resistance. The extracted natural dye also boosted electron lifetime to 3.68 ms and diffusion coefficient to 54.3×10 -6 m 2 /s while minimizing back-electron recombination at the semiconductor-electrolyte interface. Moreover, the semiconductor-electrolyte interface resistance is over 85% of the overall resistance for both DSSCs and controls electron transport through the cells, which is due to the dye-semiconductor binding intensity. Based on the photovoltaic data, the SC-DSSC cell efficiency was lower than N719-DSSC which is attributed to its higher electron transfer rate-controlling element. Thus, enhancing dye-semiconductor interactions will decrease the rate-controlling impedance and enhance cell performance.

Photovoltaic Properties and Mechanism Analysis of a Dye/Al_2O_3 Alternating Assembly Structure by Electrochemical Impedance Spectroscopy

N3/Al2o3/N749 Alternating Assembly Structure Broadening the Photoresponse and Interface Modification Effects in Quasi-Solid Dye-Sensitized Solar Cells

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Alternating Assembly Structure of the Same Dye and Modification Material in Quasi-Solid State Dye-Sensitized Solar Cell

Rational Design of ZL003-based Organic Dyes for Highly Efficient Dye-Sensitized Solar Cells: Influence of Alkynyl Group and Π-Spacers on Photovoltaic Performance

Dye-sensitized solar cell: Effect of light on N3 dye/BMII electrolyte based architecture

Compact TiO2 Film Photoanode for Investigating the Interlayer of Alternating Assembly Structure in Dye-sensitized Solar Cells

Electrochemical impedance spectroscopy analysis of dye-sensitized solar cells composed of electrospun composite photoanodes: A comparative study of natural and synthetic sensitizers

Theoretical Study of High-Efficiency Organic Dyes with the Introduction of Different Auxiliary Heterocyclic Acceptors Based on IQ1 Toward Dye-Sensitized Solar Cells.

Alumina Post-Modification After Dye-Sensitization: Effect On The Performance Of Quasi-Solid State Solar Cells

Study on Relationship between Molecular Structures of Dyes and Performance of Organic Photovoltaic Systems

Analysis on Dye-Sensitized Solar Cell'S Efficiency Improvement

Research on Photovoltaic Measurement and Electrochemical Impedance Spectroscopy Analysis of Dye-Sensitized Solar Cells With Modification of Photoanodes by TiO2 Nanofibers Composited With Zn2SnO4-SnO2 Under Various Illuminances

Atomic Scale Investigation of Dye Sensitized Solar Cells_Interface Structure and Dynamics

Impacts of ZnO/TiO<sub>2</sub> Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

An Alternative Alkylpyridinium Iodide with High Electroactivity for Efficient Dye-Sensitized Solar Cells

Excited-State and Charge Carrier Dynamics in a High-Photovoltage and Thermostable Dye-Sensitized Solar Cell

Impacts of ZnO/TiO 2 Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Improvement of dye-sensitized solar cells performance through introducing different heterocyclic groups to triarylamine dyes

Improvement of Dye-Sensitized Solar Cells' Performance Through Introducing Suitable Heterocyclic Groups to Triarylamine Dyes.

Correlating Excited State and Charge Carrier Dynamics with Photovoltaic Parameters of Perylene Dye Sensitized Solar Cells: Influences of an Alkylated Carbazole Ancillary Electron-Donor