Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Anomalous Lithium Storage in A Novel Nanonet Composed by Sno2 Nanoparticles and Poly(Ethylene Glycol) Chains

PPy‐encapsulated SnS2 Nanosheets Stabilized by Defects on a TiO2 Support As a Durable Anode Material for Lithium‐Ion Batteries

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Design and Synthesis of Graphene/sno2/polyacrylamide Nanocomposites As Anode Material for Lithium-Ion Batteries

Advancing Performance and Unfolding Mechanism of Lithium and Sodium Storage in SnO2 via Precision Synthesis of Monodisperse PEG‐Ligated Nanoparticles

Atomically Engineered Encapsulation of SnS2 Nanoribbons by Single-Walled Carbon Nanotubes for High-Efficiency Lithium Storage

Hybrid coating SnO2 for enhanced Li ions storage

Nanosize SnO₂ confined in the porous shells of carbon cages for kinetically efficient and long-term lithium storage.

Facile Synthesis of SnO2 Nanocrystals Coated Conducting Polymer Nanowires for Enhanced Lithium Storage

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

Anomalous Interfacial Lithium Storage in Graphene/tio2 for Lithium Ion Batteries.

Nano Sn-SnO x Embedded in Multichannel Hollow Carbon Nanofibers: Microstructure, Reversible Lithium Storage Property and Mechanism

In Situ Embedment of ZnS Nanocrystals in High Porosity Carbon Fibers as an Advanced Anode Material for Efficient Lithium Storage

Hollow Porous CoSnO x Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers as Anode Material for High-Performance Lithium Storage

Constructing Novel Si@SnO2 Core-Shell Heterostructures by Facile Self-Assembly of SnO2 Nanowires on Silicon Hollow Nanospheres for Large, Reversible Lithium Storage.

Advancing Performance and Unfolding Mechanism of Lithium and Sodium Storage in SnO2 via Precision Synthesis of Monodisperse PEG‐Ligated Nanoparticles (Adv. Energy Mater. 26/2022)

Ultrahigh and Durable Volumetric Lithium/Sodium Storage Enabled by a Highly Dense Graphene-Encapsulated Nitrogen-Doped Carbon@Sn Compact Monolith.

Monodispersed SnO2 Nanospheres Embedded in Framework of Graphene and Porous Carbon As Anode for Lithium Ion Batteries

SnO2/Sn Particles Anchored in Moderately Exfoliated Graphite As the Anode of Lithium-Ion Battery