Abstract:Electrical characterization of semiconducting oxide nanowires (NWs) is mostly performed using complex techniques, which necessitates a series of costly nanofabrication procedures. In this work, with the aim to provide a low-cost, feasible, facile, and reproducible approach for enabling the study of NW electrical properties, we report direct electrical measurements on individual and overlapped suspended zinc oxide NWs (ZnO NWs). We have succeeded in constructing both two- and three-terminal devices simply by employing tungsten (W) nanoprobes with the aid of a nanomanipulation system embedded inside a scanning electron microscope’s vacuum chamber. Stable contacts were established using the Joule heating effect and e-beam exposure at the junctions between the NW and the pre-cleaned W tips. P-channel field-effect transistor devices were achieved with an on–off current ratio of ∼101, a threshold voltage (>1.5 V), a transconductance of ∼16 μS, a sub-threshold swing of ∼220 mV/decade, and field-effect carrier mobility roughly estimated to be around 926.4 cm2/(V·s) after correction for contact resistances/optimization. The average resistivity of ZnO NWs was calculated to be ∼2.23 × 10–2 Ω·cm for NWs with diameters between 70 and 500 nm. Besides, we have demonstrated a contact resistance of ∼19.60 kΩ and a Schottky barrier height of ∼0.37 eV present at W/ZnO NW interfaces. The contact resistance between two overlapped ZnO NWs was estimated to be ∼283 kΩ, which is relatively higher than that offered between W/ZnO NWs. This work provides a solid experimental procedure to address true intrinsic electrical properties at metal/semiconductor interfaces, and our findings have potential applications in next-generation 3D suspended ZnO NW-based nanoelectronic devices.

Electric Transport, Reversible Wettability And Chemical Sensing Of Single-Crystalline Zigzag Zn2sno4 Nanowires

C1jm13579a 17236..17241

ZnO Nanowire and $\hbox{ws}_{2}$ Nanotube Electronics

Low-temperature chemical solution route for ZnO based sulfide coaxial nanocables: general synthesis and gas sensor application

WO3 nanowires on carbon papers: electronic transport, improved ultraviolet-light photodetectors and excellent field emitters

Optoelectronic Properties Of Single-Crystalline Zn2geo4 Nanowires

Synthesis, characterization and opto-electrical properties of ternary Zn2SnO4 nanowires.

Shape Control and Selective Decoration of Zn2SnO4 Nanostructures on 1D Nanowires: Boosting Chemical–sensing Performances

Electronic Transport Through Individual Zno Nanowires

Single-Crystalline and Twinned Zn3p2 Nanowires: Synthesis, Characterization, and Electronic Properties

Synthesis, characterization and opto-electrical properties of ternary Zn<sub>2</sub>SnO<sub>4</sub>nanowires

Optical and Electrical Applications of Znsxse1-X Nanowires-Network with Uniform and Controllable Stoichiometry

Fabrication, structural characterization and photoluminescence of single-crystal ZnxCd1-xS zigzag nanowires

Electronic Transport Characteristics Through Individual ZnSnO3 Nanowires

Characterization of Electrical Properties of Suspended ZnO Nanowires Using a Nanorobotic Manipulation System Inside a Scanning Electron Microscope for Nanoelectronic Applications

Conductometric chemical sensor based on individual CuO nanowires.

Chemical Sensors Based on Individual In2O3 Nanowires

Porous and Single-Crystalline ZnO Nanobelts: Fabrication with Annealing Precursor Nanobelts, and Gas-Sensing and Optoelectronic Performance

Enabling selectivity and fast recovery of ZnO nanowire gas sensors through resistive switching

Synthesis and Ethanol Sensing Properties of Znsno3 Nanowires

Mof Thin Film-Coated Metal Oxide Nanowire Array: Significantly Improved Chemiresistor Sensor Performance