Abstract:The control over crystal-plane exposure of nanoparticles in a variety of shapes and material types (such as metals and metal oxides) has attracted much attention because fascinating properties might be accomplished. In the case of metallic nanocrystals (NCs), it has been demonstrated that the exposed crystal facets of metallic NCs have a large influence on their catalytic reactivity and selectivity. Recent studies indicate that high-index facets of a face-centered cubic (fcc) metal (e.g. , Pd, Pt, and Au) generally exhibit significantly enhanced catalytic activity toward specific reactions compared to low-index facets because of a high density of low-coordinated surface atoms. However, up to date, studies on the design and synthesis of metallic nanostructures enclosed by high-index facets are still insufficient. High-index facets usually disappear during the growth of NCs due to their high surface energies. However, recent studies have shown that the exposure of high-index facets could be realized by tuning the growth kinetics, 16] the selective adsorption of specific chemical species, and their epitaxial growth from seeds terminating in high-index facets. 22] Herein, we report a synthetic strategy that allows the highyield fabrication of concave polyhedral Pd NCs with 32 facets that are rich in atomic steps and defects on the surface. This nanostructure was successfully prepared through an in situ facet-selective etching growth route. The vital role that iodide ions (I ) together with ethanolamine as the surface controller play in the formation of concave polyhedral Pd NCs having catalytic active sites is demonstrated. The concave polyhedral Pd NCs exhibit significantly enhanced specific and mass activities towards the electrooxidation of ethanol in comparison to truncated octahedral Pd NCs and commercial Pd black catalysts with low-index facets. In a typical synthesis of concave polyhedral Pd NCs, poly(vinyl pyrrolidone) (PVP, MW = 30 000), NaI, and an aqueous Na2PdCl4 solution were mixed together with ethanolamine. The resulting homogeneous solution was transferred to a Teflon-lined stainless-steel autoclave with a capacity of 12 mL. The sealed vessel was then heated at 200 8C for 6 h before it was cooled to room temperature (see the Experimental Section for synthesis details). The resulting products were collected by centrifugation and washed several times with water and ethanol. The representative electron microscopic images of the asobtained Pd NCs are shown in Figure 1. As depicted by transmission electron microscopic (TEM) images in Figure 1 a and Figure S1 c and d in the Supporting Information, the product consists of well-shaped NCs with a yield above 90 % and an average apex-to-apex distance of 50 nm. The nanoparticles display a darker contrast in the center compared to the edges, indicating the possible presence of concave features in the NCs. The scanning electron microscopic (SEM) images shown in Figure 1 b and Figure S1 a,b in the Supporting Information reveal that the nanoparticles have the same geometrical characteristics and can be regarded as an octapod, which is confirmed by high-angle annular dark-field scanning TEM (HAADF-STEM)

Pd Nanocrystals with Single-, Double-, and Triple-Cavities: Facile Synthesis and Tunable Plasmonic Properties

Size-Controlled Synthesis Of Pd Nanosheets For Tunable Plasmonic Properties

Broadband Tunable Mid-infrared Plasmon Resonances in Cadmium Oxide Nanocrystals Induced by Size-dependent Nonstoichiometry.

Palladium nanocrystals enclosed by {100} and {111} facets in controlled proportions and their catalytic activities for formic acid oxidation

Trimetallic PtPdCo Mesoporous Nanopolyhedra with Hollow Cavities

Direct in Situ Observation and Analysis of the Formation of Palladium Nanocrystals with High-Index Facets.

Integration of Kinetic Control and Lattice Mismatch to Synthesize Pd@AuCu Core-Shell Planar Tetrapods with Size-Dependent Optical Properties.

Plasmonic Nanocrystal Arrays on Photonic Crystals with Tailored Optical Resonances

Seed-mediated growth of Au nanorings with size control on Pd ultrathin nanosheets and their tunable surface plasmonic properties.

Controlled Deposition of Palladium Nanodendrites on the Tips of Gold Nanorods and Their Enhanced Catalytic Activity

Near-Field Plasmonic Behavior of Au/Pd Nanocrystals with Pd-Rich Tips

Palladium nanocrystals bound by {110} or {100} facets: from one pot synthesis to electrochemistry.

Heteroepitaxial Growth of High-Index-Faceted Palladium Nanoshells and Their Catalytic Performance

Differentiating Plasmon-Enhanced Chemical Reactions on AgPd Hollow Nanoplates through Surface-Enhanced Raman Spectroscopy

Growth of Concave Polyhedral Pd Nanocrystals with 32 Facets Through in Situ Facet-Selective Etching.

Self-Assembled Pd Nanocomposites into a Monolayer for Enhanced Sensing Performance

Direct observation of the plasmon-enhanced palladium catalysis with single-molecule fluorescence microscopy

Fabrication of Plasmonic Nanoparticles on a Wave Shape PDMS Substrate

Heteroepitaxial Growth of Core-Shell and Core-Multishell Nanocrystals Composed of Palladium and Gold.

Two-thiols-regulated fabrication of plasmonic nanoparticles with co-enhanced Raman scattering and circular dichroism responses

Fine-tune chiroptical activity in discrete chiral Au nanorods