Abstract:With a theoretical capacity of 1166 mA·h·g(-1), lithium sulfide (Li(2)S) has received much attention as a promising cathode material for high specific energy lithium/sulfur cells. However, the insulating nature of Li(2)S prevents the achievement of high utilization (or high capacity) and good rate capability. Various efforts have been made to ameliorate this problem by improving the contact between Li(2)S and electronic conductors. In the literature, however, a relatively high capacity was only obtained with the Li(2)S content below 50 wt %; therefore, the estimated cell specific energy values are often below 350 W·h·kg(-1), which is insufficient to meet the ever-increasing requirements of newly emerging technologies. Here, we report a cost-effective way of preparing nanostructured Li(2)S-carbon composite cathodes by high-energy dry ball milling of commercially available micrometer-sized Li(2)S powder together with carbon additives. A simple but effective electrochemical activation process was used to dramatically improve the utilization and reversibility of the Li(2)S-C electrodes, which was confirmed by cyclic voltammetry and electrochemical impedance spectroscopy. We further improved the cycling stability of the Li(2)S-C electrodes by adding multiwalled carbon nanotubes to the nanocomposites. With a very high specific capacity of 1144 mA·h·g(-1) (98% of the theoretical value) obtained at a high Li(2)S content (67.5 wt %), the estimated specific energy of our cell was ∼610 W·h·kg(-1), which is the highest demonstrated so far for the Li/Li(2)S cells. The cells also maintained good rate capability and improved cycle life. With further improvement in capacity retention, nanostructured Li(2)S-C composite cathodes may offer a significant opportunity for the development of rechargeable cells with a much higher specific energy.

Large-Scale Synthesis of In2s3 Nanosheets and Their Rechargeable Lithium-Ion Battery

Large-scale synthesis of ultrathin hexagonal tin disulfide nanosheets with highly reversible lithium storage.

Lithium‐Ion Batteries: Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material for Lithium‐Ion Batteries (Adv. Energy Mater. 15/2019)

Large-scale synthesis and application of SnS2–graphene nanocomposites as anode materials for lithium-ion batteries with enhanced cyclic performance and reversible capacity

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

In2S3 nanosheets array anchored on reduced graphene oxide as high-performance anode for sodium-ion batteries

Two-dimensional nanosheet arrays with chemically bonded Cu 2 S@NSC heterostructure for efficient sodium-ion storage

Scalable Synthesis of Si Nanosheets as Stable Anodes for Practical Lithium-Ion Batteries

Pseudocapacitance-tuned high-rate and long-term cyclability of NiCo2S4 hexagonal nanosheets prepared by vapor transformation for lithium storage

From Metal–Organic Framework to Li2S@C–Co–N Nanoporous Architecture: A High-Capacity Cathode for Lithium–Sulfur Batteries

Synthesis Of In2o3/Carbon Core-Shell Nanospheres And Their Electrochemical Performance

NiO nanosheets grown on carbon cloth as mesoporous cathode for High-performance lithium-sulfur battery

In situ uniformly vertical growth of SnSe 2 nanosheet arrays on carbon cloth as a self-supporting anode toward effective sodium-ion storage

Interface-engineered MoS2/C Nanosheet Heterostructure Arrays for Ultra-Stable Sodium-Ion Batteries

Nanostructured Li₂S-C Composites As Cathode Material for High-Energy Lithium/sulfur Batteries.

Engineering of Ni3S4/Co3S4 nanosheets@N, S co-doped carbon anode for lithium-ion batteries

Vertical growth of nickel sulfide nanosheets on graphene oxide for advanced sodium-ion storage

Synthesis of SnS_2 Nanosheets and Their Electrochemical Performances Used As Anode Materials of Li-ion Battery

Lithium‐Ion Batteries: Scalable 2D Mesoporous Silicon Nanosheets for High‐Performance Lithium‐Ion Battery Anode (small 12/2018)

Electrophoretic Deposition of Tin Sulfide Nanocubes as High‐Performance Lithium‐Ion Battery Anodes

Facile synthesis of magnetic Fe3S4 nanosheets and their application in lithium-ion storage