Abstract:Novel thermoplastic polyurethane (TPU)/multi walled carbon nanotubes (MWCNTs) conductive nanocomposites were fabricated by direct solution compounding method for volatile organic compounds (VOCs) sensors applications. The results of field emission scanning electron microscopy (FESEM) and electrical conductivity test showed that MWCNTs formed ideal conductive networks in TPU matrix. The volume conductivity of TPU/MWCNTs nanocomposites increased from 10-12 to 10-4 S/mm, and the percolation value was 4.76 wt%. The size parameters of MWCNTs did not show obvious effects on the formation of conductive networks based on our comparative investigation. XRD and FTIR tests showed that MWCNTs enhanced the short range ordered structure in amorphous region of TPU due to the physical entanglement. The characteristic stretching of TPU showed no obvious change because of weak chemical interaction between MWCNTs and TPU. Moreover, MWCNTs effectively enhanced the thermal stability of the nanocomposites, as verified by TG analysis. The gas sensing property tests showed that the gas sensing response of TPU/MWCNTs nanocomposites mainly came from the resistance changes due to the disconnection of conductive networks, as a result of VOCs adsorption-swelling effects. The prepared nanocomposites showed superior selectivity, especially to benzene vapor when compared with formaldehyde and other gases. The parameters and contents of MWCNTs have a certain influence on the gas sensing response speed and recovery ability of the nanocomposites. In addition, the prepared TPU/MWCNTs nanocomposites displayed excellent repeatability and fast response to the change of electrical resistance (in seconds) after cyclic exposure to VOCs and pure dry air.

A Novel Polycaprolactone‐grafted‐carbon Black Nanocomposite‐based Sensor for Detecting Solvent Vapors

Sensors for Organic Vapor Detection Based on Composites of Carbon Nonotubes Functionalized with Polymers

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

Composites of Carbon Black Functionalized with Polymers As Candidates for the Detection of Methanol Vapor

A Novel Humidity Sensor Based on Carbon Black/poly(4-vinylpyridine) Nanocomposite

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

Poly(4-vinylpyridine)/carbon Black Composite As a Humidity Sensor

Conducting polymer–carbon black nanocomposite sensor for volatile organic compounds and correlating sensor response by molecular dynamics

Gas Microsensors Based on Polymer-Carbon Black Composites

Conductive-carbon-black filled PDMS chemiresistor sensor for the detection of volatile organic compounds.

Novel Vapor Sensor Based on Chemical Coupling Effect of Composite

Selective Detection Of Trace P-Xylene By Polymer-Coated Qcm Sensors

Gas Sensors Based on MWCNTs-PVP Composite Films for 1,2-Dichloroethane Vapor Detection

Properties of Conductive Poly(Ethylene Oxide) (peo)/carbon Black (cb) Composite As A Vapor Sensor

Analysis of Gas Sensing Behaviors of Carbon Black/waterborne Polyurethane Composites in Low Concentration Organic Vapors

Preparation and Investigation of Toluene-Sensing Properties of Polymer/Inorganic Composite and Multi-Layer Films

Gas sensing conductive composites capable of size-dependent molecular discrimination and screening

Gas Sensor Arrays Based on Polymer-Carbon Black to Detect Organic Vapors at Low Concentration

Resistive Gas Sensors Based on MWCNTs-PVP Composite Films

Comparative study on TPU/multi-walled carbon nanotubes conductive nanocomposites for volatile organic compounds sensor applications

Selective Detection of Trace 1-Butanol by Qcm Sensor Coated with Copolymer P(Hema-Co-Ma)