Abstract:A new-type exciplex emission was obtained employing hole-transporting material 4,4,4″-tris[3-methylphenyl(phenyl)amino]triphenylamine (m-MTDATA) doped in the electron-transporting material 2,2,2″-(1,3,5-benzenetriyl)tris-[1-phenyl-1H-benzimidazole] (TPBI) with structures of ITO/m-MTDATA (45nm)/NPB (5nm)/m-MTDATA:TPBI ((10nm, molecular weight ratio were 3:1, 1:1 and 1:3)/TPBI (25nm)/Alq3 (15nm)/LiF (0.5nm)/Al. For comparison, a device with exciplex emission generated at the interface between a hole-transporting material m-MTDATA and an electron-transporting material TPBI with a structure ITO/m-MTDATA (45nm)/NPB (5nm)/m-MTDATA (5nm)/TPBI (30nm)/Alq3 (15nm)/LiF (0.5nm)/Al was also fabricated. The maximum efficiencies of the doped-devices reached 3.8lm/W (at 4V with a luminance of 145.7cd/m2), 3.2lm/W(at 4V with a luminance of 132cd/m2) and 4.6lm/W (at 4V with a luminance of 170.5cd/m2) with different molecular weight ratio (MWR) 3:1, 1:1 and 1:3, respectively, comparing to that of the none-doped device of 1.8lm/W (at 4V with a luminance of 49.6cd/m2). At such a low voltage, exciplex emission was major for all the devices above. Only yellow emission was obtained in none-doped structure and the maximum luminance reached 2555cd/m2 at 12V. Commission International de L’Eclairage coordinate (1931, CIE) in this structure changed from (0.397, 0.532) to (0.311, 0.413) with voltage from 4 to 16V. In doped devices, a yellow emission was obtained at a low bias voltage and then turned into white emission with increasing of voltage for stronger blue emission from m-MTDATA due to the sufficient charge trapping from TPBI to m-MTDATA. The CIE coordinates were (0.406, 0.533), (0.409, 0.533) and (0.427, 0.536) at 4V for MWR 3:1, 1:1 and 1:3, respectively. At 8, 8, 12V, white emission were obtained with CIE coordinates (0.320, 0.400), (0.311, 0.384), (0.319, 0.401) for MWR 3:1, 1:1, 1:3 and turned into (0.264, 0.303), (0.246, 0.275), (0.302, 0.363) when voltage increased to 16V. The maximum luminance was 3810 (at 14V), 4210 (at 12V) and 4583cd/m2 (at 12V) for MWR 3:1, 1:1 and 1:3, respectively.

1,3,6,8-Tetrakis[(triisopropylsilyl)ethynyl]pyrene: A Highly Efficient Solid-State Emitter for Non-Doped Yellow Electroluminescence Devices

White polymer phosphorescent light-emitting devices with a new yellow-emitting iridium complex doped into polyfluorene

Crafting NPB with tetraphenylethene: a win–win strategy to create stable and efficient solid-state emitters with aggregation-induced emission feature, high hole-transporting property and efficient electroluminescence

A Twisting Donor‐Acceptor Molecule with an Intercrossed Excited State for Highly Efficient, Deep‐Blue Electroluminescence

Bright-yellow Molecular Organic Light-Emitting Diodes Based on Two Novel Silole Derivatives

Highly Efficient Greenish-Yellow Phosphorescent Organic Light-Emitting Diodes Based on a Novel 2,3-Diphenylimidazo[1,2-a]Pyridine Iridium(III) Complex

Efficient, saturated red electroluminescent devices with modified pyran-containing emitters

Efficient organic light-emitting device from exciplex emission between 4,4′,4″-tris[3-methylphenyl(phenyl)amino]triphenylamine and 2,2′,2″-(1,3,5-benzenetriyl)tris-[1-phenyl-1H-benzimidazole]

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Efficient Solid Emitters with Aggregation-Induced Emission and Intramolecular Charge Transfer Characteristics: Molecular Design, Synthesis, Photophysical Behaviors, and Oled Application

Highly Efficient Blue Electroluminescent Materials Based on Phenanthro[9,10-D]Imidazole

Pyrene‐Based Emitter with a Small Energy Gap Between High‐Energy Triplet and Singlet State for High‐Performance Blue Organic Light‐Emitting Diodes

Undoped yellow-emitting organic light-emitting diodes from a phenothiazine-based derivative

Efficient solution-processable non-doped hybridized local and charge-transfer (HLCT) emitter for a simplified organic light-emitting diode

Aggregation-enhanced emission and efficient electroluminescence of conjugated polymers containing tetraphenylethene units

Dipolar 1,3,6,8-tetrasubstituted pyrene-based emitters containing hole- and electron-transporting moieties: Syntheses, structures, optical properties, electrochemistry and electroluminescence

A Triphenylamine Derivative As an Efficient Organic Light Color-Conversion Material for White LEDs

A Silole‐Based Efficient Electroluminescent Material with Good Electron‐Transporting Potential

Synthesis, characterization, photophysics and electroluminescence based on a series of pyran-containing emitters

Diarylamino-substituted Perylene Compound: Synthesis, Fluorescence, and Application in Yellow LEDs

Highly Efficient Nondoped Blue Organic Light-Emitting Diodes Based on a Star-Group Tetraphenylethylene-Substituted Aggregation-Induced-emission-active Organic Fluorescent Small Molecules