Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

AC electroosmotic flow of generalized Maxwell fluids in a rectangular microchannel

Alternating Current (AC) Electroosmotic Flow of Generalized Maxwell Fluids Through a Circular Microtube

Transient AC Electro-Osmotic Flow of Generalized Maxwell Fluids through Microchannels

Time Periodic Electroosmotic Flow of the Generalized Maxwell Fluids in a Semicircular Microchannel

Transient Electro-Osmotic Flow of Generalized Maxwell Fluids Through a Microchannel

Time Periodic Electroosmotic Flow of the Generalized Maxwell Fluids Between Two Micro-Parallel Plates

Numerical Analysis for Electroosmotic Flow of Fractional Maxwell Fluids

Electro-osmotic Flow of Generalized Maxwell Fluids in Triangular Microchannels Based on Distributed Order Time Fractional Constitutive Model

Alternating Current Electro-Osmotic Flow of the Maxwell Fluids Through a Circular Micro-Pipe

Alternating current electroosmotic flow of the Jeffreys fluids through a slit microchannel

Alternating Current Electroosmotic Flow of Maxwell Fluid in a Parallel Plate Microchannel with Sinusoidal Roughness

Transient Electroosmotic Flow of General Maxwell Fluids Through a Slit Microchannel

Electroviscous Effect on Electromagnetohydrodynamic Flows of Maxwell Fluids in Parallel Plate Microchannels

Exact Solutions for Electro-Osmotic Flow of Viscoelastic Fluids in Rectangular Micro-Channels

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Electroosmotic Flow of Viscoelastic Fluid through a Constriction Microchannel

Quasi‐periodic Electro‐osmotic Flow of Fractional Viscoelastic Fluids

Unsteady Electroosmotic Flow of Power-Law Fluid in a Rectangular Microchannel

Dynamic aspects of electroosmotic flow in a cylindrical microcapillary

Effect of magnetic field on electroosmotic flow of viscoelastic fluids in a microchannel

Exact solution of electroosmotic flow of the second grade fluid in a circular microchannel driving by an AC electric field