Abstract:The relevant phase transformations induced by atomic diffusion at the vicinity of Nb/TiAl heterogenous interface were systematically investigated by establishing a novel system of TiAl-Nb couple via metallurgical bonding of Nb block and γ-TiAl powders by hot pressing sintering and post-annealing treatments. As a result, the resultant diffusion layer, acting as adhesive region linking the Nb and TiAl substrates, thickened with the increase of annealing temperature and the prolongation of holding time, which could be well described by the developed power function. A series of intermediate phases initially nucleated at the Nb/TiAl interface and grew toward both substrates, which was the result of the exchange, partitioning and recombination of solute atoms in the light of vacancy-mediated substitutional diffusion pattern. The phase transformation path on the Nb side was β→η→η + σ→σ→β 0 →β 0 + γ n , while that on the TiAl side was γ→γ ss →γ ss + α→(γ + α)+ (α + β 0 )→α + β 0 →β 0 + γ n . Then the disorder-order transition of α→α 2 and β 0 →B2 occurred during cooling. The progress of phase transformation slowed down as the diffusion proceeded, which was attributed to the decrease in atomic substitution efficiency due to the reduction of atomic concentration gradient and the extension of migration distance. In such a case, the banded σ ba split into spike σ sp along the direction of maximum concentration gradient, and then shrunk to isolated σ is until completely dissolved in β 0 regime, principally dominated by Ti occupying Nb sublattices. The lenticular γ n existed mainly in the form of twins, resulting from the lattice reconstruction in accordance with the orientation relationship of 111γ//110β0 and 1̅10γ//11̅1β0 in the Al partitioning region during the spontaneous fluctuation of atomic concentration of β 0 regime. These findings filled some fundamental gaps with respect to TiAl-Nb diffusion reaction system, and afforded profound insights into the development of high-performance TiAl/Nb composites with tailorable microstructure.

Assessment of Diffusion Mobility for the Bcc Phase of the Ti–Al–Cr System

Assessment of Mobilities of the B2 Phase in the Nickel-Chromium-Aluminum System

Diffusion mobilities for the B2-b.c.c. phase in the Ni–Al binary system

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Interdiffusion and Atomic Mobility in BCC-A2 Mo-Zr and Mo-Nb-Zr Alloys with Very Steep Composition Profiles

Thermodynamic Assessment of the Fe–Mn–Ni System and Diffusion Mobility of Its Face-Centered Cubic Phase

Thermodynamic assessment of the Co–Fe–Ni system and diffusion study of its fcc phase

Thermodynamic and diffusion kinetic studies of the Co-Al–Fe system

Experimental Study and Computer Simulation on Multicomponent Diffusion in Multiphase Dispersions During Solid Carburizing of HP40Nb and KHR45A Alloys

Diffusion Coefficients of the Ni-Co-Fe Alloys Studied by Molecular Dynamics Simulation and CALPHAD Assessment

Experimental Investigation and Thermodynamic Assessment of the Cr–Ti System

Application of the Thermodynamic Extremal Principle to Diffusion-Controlled Phase Transformations in Fe-C-X Alloys: Modeling and Applications

Investigation on diffusion kinetics of Ti-X binary systems at 1300-1500°C

Atomic diffusion and microstructural evolution at the Nb/TiAl heterogenous interfaces during annealing at elevated temperatures

Diffusion kinetics for fcc quinary Cu–Co–Mn–Ni–Si system and its application to precipitation simulations

Experimental determination of the liquidus projection of the B-Cr-Ti system

Bulk and grain boundary tracer diffusion in multiphase AlCoCrFeNiTi 0.2 compositionally complex alloy

Diffusivity and atomic mobility in fcc Cu–Mn–Si alloys: measurements and modeling by CALTPP program

Investigation on the Diffusion Behaviors and Mechanical Properties of the Ti/Al Interface Using Molecular Dynamics Simulation

Growth Characterization of Intermetallic Compound at the Ti/Al Solid State Interface

Diffusion in Ni-Based Single Crystal Superalloys with Density Functional Theory and Kinetic Monte Carlo Method