Abstract:Increased cooling requirements of many compact systems involving high heat fluxes demand the development of high-performance cooling techniques including immersion cooling utilizing pool boiling. This study presents the functionalization of copper surfaces to create interfaces for enhanced pool boiling heat transfer. Three types of surface structures including a crosshatch pattern, shallow channels and deep channels were developed using nanosecond laser texturing to modify the surface micro- and nanomorphology. Each type of surface structure was tested in the as-prepared superhydrophilic state and superhydrophobic state following hydrophobization, achieved through the application of a nanoscale self-assembled monolayer of a fluorinated silane. Boiling performance evaluation was conducted through three consecutive runs under saturated conditions at atmospheric pressure utilizing water as the coolant. All functionalized surfaces exhibited enhanced boiling heat transfer performance in comparison with an untreated reference. The highest critical heat flux of 1697 kW m−2 was achieved on the hydrophobized surface with shallow channels. The highest heat transfer coefficient of 291.4 kW m−2 K−1 was recorded on the hydrophobized surface with deep channels at CHF incipience, which represents a 775% enhancement over the highest values recorded on the untreated reference. Surface microstructure was identified as the key reason for enhanced heat transfer parameters. Despite large differences in surface wettability, hydrophobized surfaces exhibited comparable (or even higher) CHF values in comparison with their hydrophilic counterparts, which are traditionally considered as more favorable for achieving high CHF values. A significant reduction in bubble departure diameter was observed on the hydrophobized surface with deep channels and is attributed to effective vapor entrapment, which is pointed out as a major contributing reason behind the observed extreme boiling heat transfer performance.

Heat Transfer Performance of Pool Boiling on Horizontal Surface Sintered with Copper Fiber Felt

Subcooled Pool Film Boiling Heat Transfer from Spheres with Superhydrophobic Surfaces: an Experimental Study

Enhanced Boiling Heat Transfer on Composite Porous Surface

Effect of biomimetic fishbone-patterned copper tubes on pool boiling heat transfer

Femtosecond laser-treated copper sintering surface to enhance pool boiling heat transfer

Pool boiling experiment characteristics on the pure copper surface

Experimental study on pool boiling enhancement by unique designing of porous media with a wettability gradient

Enhanced pool boiling heat transfer characteristics on microstructured copper surfaces coated with hybrid nanofluid

Pool Boiling Heat Transfer of R141b on Surfaces Covered Copper Foam with Circular-Shaped Channels

Enhancement of pool boiling heat transfer by laser texture-deposition on copper surface

Experimental study on the pool boiling performance of a highly self-dispersion TiO2 nanofluid on copper surface

Effect of copper foam thickness on pool boiling heat transfer of HFE-7100

Experimental investigation on pool boiling heat transfer enhancement using reticular bi-conductive surfaces

Heat transfer enhancement of helical tubes during pool boiling

Onset of Boiling, Heat Transfer and Flow Patterns of Flow Boiling On the Superhydrophobic Porous Copper Surface in a Microchannel

Enhanced pool boiling performance of a porous honeycomb copper surface with radial diameter gradient

Surface Modification Utilizing Photolithography Process for Pool Boiling Enhancement: An Experimental Study

Enhanced pool boiling on composite microstructured surfaces with microcavities on micro-pin-fins

Experimental and parametric study in pool boiling enhancement with self-induced jet impingement on the microporous copper surface using R1336mzz(Z)

Experimental investigation on the influence of copper foam characteristics on pool boiling heat transfer

Nanosecond Laser-Textured Copper Surfaces Hydrophobized with Self-Assembled Monolayers for Enhanced Pool Boiling Heat Transfer