Abstract:Microextraction coupled to mass spectrometry (MS) has great potential in analytical chemistry laboratories operating in a variety of fields. Indeed, microextraction methods directly coupled to MS can be of large value given that they can provide not only analyte extraction and enrichment but also effective sample cleanup. In recent years, the practicality in handling high active surface area, versatility, and environmentally friendly features of magnetic dispersive microextraction technologies has contributed to an explosion in the number of methods and technologies reported in the literature for a wide range of applications. However, to the best of our knowledge, no technology to date has been capable of efficiently merging these two rising concepts in a simple and integrated analytical workflow. In this context, the microfluidic open interface is presented for the direct coupling of dispersive magnetic extraction to mass spectrometry. This technology operates under the concept of a flow-isolated desorption volume, which generates a stagnant droplet open to ambient conditions while continuously feeding the ionization source with solvent by means of the self-aspiration process intrinsic of the electrospray ionization (ESI) interface. To improve the efficiency of the final analytical workflow, a novel dispersive magnetic micro- and nanoparticle extraction protocol for biofluid droplets was developed. The final methodology entailed the dispersion of a small amount of magnetic particles (20-70 μg) in a droplet of biofluid (≤40 μL) for extraction, followed by a particle collection step using a homemade 3D-printed holder containing an embedded rare-earth magnet. In the final step, the holder is set on top of the microfluidic open interface (MOI) for desorption in the isolated droplet. Switching the valve transfers the desorbed analytes to the ESI source in less than 5 s. As proof of concept, the completely new setup was applied to the determination of prohibited substances from phosphate-buffered saline (PBS) and human urine using Fe2O3 magnetic nanoparticles (50 nm) functionalized with C18. The limits of quantitation (LOQs) obtained were in the low-ppb range in all cases, and acceptable precision (≤20%) and accuracy (80-120%) were attained. Also, taking advantage of the fast extraction kinetics provided by the radial diffusion associated with small particles, we employed the methodology for the selective extraction of phosphopeptides from 40 μL of tryptic β-casein digest using 70 μg of magnetic Ti-IMAC microparticles. To conclude, the technology and methodology herein presented provided excellent capabilities comparable to those of other solid-phase microextraction (SPME-MS) approaches while dramatically minimizing the amount of sample and sorbent required per analysis, as well as affording significantly fast extraction times due to the enhanced kinetics of extraction.

Microfluidic droplet-based liquid/liquid extraction modulated by the interfacial Galvani potential difference.

Interfacial Partitioning Enhances Microextractionby Multicomponent Nanodroplets

Stopped-flow liquid-liquid extraction on microfluidic chips

On-chip drop-to-drop liquid microextraction coupled with real-time concentration monitoring technique

Microfluidic Liquid-Liquid Extraction System Based on Stopped-Flow Technique and Liquid Core Waveguide Capillary

The micro-volume liquid focusing effect in Janus membrane and its biosensing application

A Streaming-Potential-based Microfluidic Measurement of Surface Charge at Immiscible Liquid-Liquid Interface

Microfluidic chip-based liquid-liquid extraction and preconcent ~ tion using a novel droplet trapping technique

A Microfluidic Chip Based Liquid–liquid Extraction System with Microporous Membrane

The enhancement of liquid–liquid extraction with high phase ratio by microfluidic-based hollow droplet

Studies on Charge Transfer Across the Micro-Liquid/Liquid Interface Supported at A Double-Barrel Micropipette

A microfluidic study of synergic liquid-liquid extraction of rare earth elements.

Online monodisperse droplets based liquid–liquid extraction on a continuously flowing system by using microfluidic devices

Microfluidic Chip-Based Liquid-Liquid Extraction and Preconcentration Using A Subnanoliter-Droplet Trapping Technique

Probing Non-Polarizable Liquid/liquid Interfaces Using Scanning Ion Conductance Microscopy

A novel membrane dispersion micro-extractor

A successive laminar flow extraction for plant medicine preparation by microfluidic chip

A Simple Online Phase Separator for the Microfluidic Mass Transfer Studies

Liquid-liquid Extraction Performance in a Miniaturized Magnetic Extractor

Direct Coupling of Dispersive Extractions with Magnetic Particles to Mass Spectrometry via Microfluidic Open Interface

Micro-electrode System Designed to Determine H+ Concentration Distribution at Particle-Water Interface.