Abstract:For the first time, an ion imprinted polymer (IIP) able to selectively extract simultaneously all the lanthanide ions was successfully synthesized in acetonitrile using Nd3+ as a template ion, methacrylic acid as a complexing monomer, and ethylene glycol dimethacrylate as a cross-linker. A non-imprinted polymer (NIP) was synthesized under the same conditions as those of the IIP, but in the absence of the template ion. After the removal of the template ions, grounding and sieving, the IIP particles were packed in solid phase extraction (SPE) cartridges. The selectivity of the IIP was evaluated by comparing its behavior with the one of the NIP. Each SPE step (percolation, washing, and elution) was optimized in order to find the best compromise between the selectivity and the extraction recoveries. Using the optimized SPE conditions, the extraction recoveries of eight lanthanide ions representative of the lanthanide family were higher than 77% with an average value of 83% with the IIP, whereas, in the case of the NIP, they ranged between 14 and 36% and they were below 3% for the interfering ions from alkali, transition, and post-transition metal families with the IIP. A first evaluation of the reproducibility of the SPE profiles was carried out by performing statistical tests on the data obtained with several cartridges filled with particles obtained from two different IIP and NIP syntheses. Promising results were obtained. The specific capacity, i. e. the adsorption capacity of Nd3+ ions by the specific cavities of the imprinted polymer, was about 9 mg of Nd3+ per gram of IIP (60 μmol g-1), which is more than enough for the extraction of the lanthanide ions at trace levels. The breakthrough volume was about 1 mL per mg of IIP, leading to an enrichment factor of 15, which allows not only to selectively extract the lanthanides but also to concentrate them. Finally, the imprinted polymer was successfully used to selectively extract lanthanides from tap and river waters spiked at 1 μg L-1.

Synthesis And Applications Of Novel Attapulgite-Supported Co(Ii)-Imprinted Polymers For Selective Solid-Phase Extraction Of Cobalt(Ii) From Aqueous Solutions

Selective adsorption of Zn2+ on surface ion-imprinted polymer

Synthesis and Application of Novel Magnetic Ion-Imprinted Polymers for Selective Solid Phase Extraction of Cadmium (II)

Preparation of Magnetic Surface Ion-Imprinted Polymer Based on Functionalized Fe3O4 for Fast and Selective Adsorption of Cobalt Ions from Water

Use of the dummy approach for the synthesis of ion imprinted polymers with Ni(II) or Zn(II) as template ion for the solid‐phase extraction of Cu(II)

Recognizing adsorption of Cd(II) by a novel core-shell mesoporous ion-imprinted polymer: Characterization, binding mechanism and practical application

Novel MOFs-based ion-imprinted polymer for selective separation of cobalt ions from waste battery leaching solution

Optimization of diatom-based blotting materials and their efficient selective adsorption of Pb(II)

Synthesis and Application of a Novel Metal–Organic Frameworks-Based Ion-Imprinted Polymer for Effective Removal of Co(II) from Simulated Radioactive Wastewater

Evaluating SiO 2 /Al 2 O 3 /poly(acrylic acid-co-glycidyl methacrylate) composite as a novel adsorbent for cobalt(II) radionuclides

Selective Adsorption Behavior and Mechanism for Cd(II) in Aqueous Solution with a Recoverable Magnetie-Surface Ion-Imprinted Polymer

Covalent Organic Framework-Lzu1@pei@fe3o4-based Magnetic Dispersive Micro-Solid Phase Extraction of Tetracyclines from Environmental Water Prior to HPLC Analysis.

Selective solid phase extraction and preconcentration of Cd(II) in the solution using microwave-assisted inverse emulsion-suspension Cd(II) ion imprinted polymer

Selective solid phase extraction of lanthanides from tap and river waters with ion imprinted polymers

Preparation, characterization and application of the Pb-ion-imprinted polymers based on epoxy resin and polyamide-amine dendrimers

Selective biosorption of Li+ in aqueous solution by lithium ion-imprinted material on the surface of chitosan/attapulgite

Self‐assembly of thiourea intercalated graphene oxide based dual IIP for the SPE coupled FAAS method development of Cu(II) and Pb(II) determination

Ionic liquids-assisted integration of biobased materials for sustainable elaboration of nanocomposites using hydroxyethyl cellulose and interlayered clay for efficient separation of Co(II) from multi-component mixtures

Synthesis of a new ionic imprinted polymer for the extraction of uranium from seawater

An ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique combined with a sol-gel process for selective solid-phase extraction of cadmium(II)

Synthesis and characterization of epoxy resin-based ion-imprinted polymer for selective removal of copper ions