Abstract:Upon free solidification of a deeply undercooled melt, the solute diffusion in both the interface and the bulk liquid is far from equilibrium, and the concentration and the fluid flow may also play an important role in the solidification. Thus, under such conditions, assumptions about local equilibrium, ideal dilute solution solidification and solidification free of fluid flow can no longer be valid. In the present work, first, in order to reveal the concentration effect, we compared the results of the non-equilibrium dendrite growth models describing the solidification of dilute and non-dilute undercooled melts. It was found that under local non-equilibrium conditions, the predicted results of the non-dilute solution model and the dilute solution model are to a certain extent different from each other at the intermediate undercooling range. It was also found that the concentration effect could substantially decrease the relaxation effect. Second, we considered the effect of fluid flow on the rapid solidification of an undercooled melt. It was found that the fluid flow would affect not only the size of the dendrite tip radius, mainly at the small undercooling range, but also the dendrite growth velocity at the intermediate undercooling range. In particular, fluid flow makes the sizes of the dendrite tip radius at high undercooling close to those predicted by the dilute model. Thus, fluid flow could make the non-dilute solution exhibit dilute solution solidification behaviors. It was also found that fluid flow reduces the relaxation effect to some extent. Considering the fluid flow effect, we used an extended chemical superheating model to predict the dendrite remelting phenomenon of the non-dilute melt. The model predicted that the dendrite remelting phenomenon would abruptly disappear once the dendrite growth velocity exceeded the solute diffusion velocity in a bulk undercooled melt. Third, considering the fluid flow effect, we used the concept of equivalent undercooling and a recently developed physical model to calculate the stress accumulation during rapid solidification. The results of this new model could explain well the stress-induced dendrite breakup mechanism of grain refinement at high undercooling.

Solute Layers and Double-Diffusive Interfaces During the Solidification of NH[sub 4]Cl-H[sub 2]O in Rectangular Cavities

Experimental Study On Double-Diffusive Convection During Solidification Of Nh4cl-H2o Hypereutectic Solution In Cylindrical Cavity

Experimental Investigation of NH4Cl-H2O Eutectic Solution Solidification for Simulating Crystal Growth with Bridgman Method

Concentration and Fluid Flow Effects on Kinetics, Dendrite Remelting and Stress Accumulation Upon Rapid Solidification of Deeply Undercooled Alloys

Solidification shrinkage and shrinkage-induced melt convection and their relation with solute segregation in binary alloys

Dynamics of Water in LiCl and CaCl2 Aqueous Solutions Confined in Silica Matrices: A Backscattering Neutron Spectroscopy Study

EXPERIMENTAL STUDY THE SOLIDIFICATION PROCESS OF WATER IN RECTANGULAR ENCLOSURE

Phase change interface stability during isochoric solidification of an aqueous solution

Phase-field Simulation of Influence of Solute Gradient to Process of Non-Isothermal Solidification

Finite-sample-size effects on convection in mushy layers

Exploration of the coupled lattice Boltzmann model based on a multiphase field model: a study of the solid-liquid-gas interaction mechanism in the solidification process

Influence of Solutal Convection on Solute Distribution of Melt During Preparation of Directionally Solidified Sn–36 At.%ni Peritectic Alloy

Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy

In situ analysis of solute and flow fields in directional solidification of immiscible Al–Bi alloy

Melting Characteristics of Equiaxed NH<sub>4</sub>Cl Crystals Settling in Superheated NH<sub>4</sub>Cl-H<sub>2</sub>O Melts

The role of solute concentration in interface instability during alloy solidification: A viewpoint from the free energy

THERMOSOLUTAL CONVECTION DURING DIRECTIONAL SOLIDIFICATION OF Al-Li ALLOYS

On Physical Mechanisms of Mushy Zone Formation in Solidification of Pure Semitransparent Materials

Solute Distribution During Rapid Solidification Into An Undercooled Melt

Stable Solid–Liquid Equilibrium of the Quaternary System Na+//Cl–, NO3–, and SO42––H2O at 333.15 K

Numerical Simulation of Channel Segregation in Directional Solidification