Abstract:An air-breathing micro direct methanol fuel cell (mu DMFC) with a water collecting and recycling cathode structure is presented in this paper. The mechanism of water generation in cathode and water collection from the cathode is studied. The capillary channels with hydrophilic surface are designed along the ribs of the air-breathing cathode window to collect excessive water. The collected water is then released via an exhaust pipe. Microfabrication techniques, including double-side lithography and KOH etching, are used to fabricate the anode and cathode plates of the mu DMFC on the same silicon wafer simultaneously. The silicon plate surface is treated by low temperature oxygen plasma to improve the hydrophilicity. The mu DMFC with the water collecting and recycling structure and the regular one without, both with an active area of 7.8 x 7.8 mm(2), are assembled and characterized. Experimental results show that the maximum power density and current density of the both mu DMFCs are more than 10 mW cm(-2) and nearly 100 mA cm(-2) at room temperature, respectively. After both mu DMFCs operate at 0.15 V (about 60 mA cm(-2) at room temperature) for 1 h, the outputs of the prototype with water collecting and recycling structure decrease to about 9.7 mW cm(-2) and 95 mA cm(-2) only, while that of regular one decrease to 9 mW cm(-2) and 75 mA cm(-2). The water is collected by the exhaust pipe in evidence. As such, it would be possible to recycle the water from cathode to anode. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

A Self-Breathing Microdirect Methanol Fuel Cell with A Spoke Cathode Structure

Design and Fabrication of a Silicon-Based Direct Methanol Fuel Cell with a New Cathode Spoke Structure

Research on Novel Cathode Structure of Air-Breathing Micro-Direct Methanol Fuel Cell

A self-breathing metallic micro-direct methanol fuel cell with the improved cathode current collector

A passive micro direct methanol fuel cell with cross-structure cathode

Design, Fabrication and Testing of an Air-Breathing Micro Direct Methanol Fuel Cell with Compound Anode Flow Field

Design and Performance Analysis of an Air-Breathing Micro Direct Methanol Fuel Cell

Effect of cathode gas flow patterns on performance of micro direct methanol fuel cell

Design, Optimization and Microfabrication of a Micro-Direct Methanol Fuel Cell with Microblocks in Anode Structure

A Tapered Serpentine Flow Field for the Anode of Micro Direct Methanol Fuel Cells

An Air-Breathing Micro Direct Methanol Fuel Cell with 3D KOH-Etched Cathode Structure

Stainless Steel Fiber Felt As Cathode Diffusion Backing and Current Collector for A Micro Direct Methanol Fuel Cell with Low Methanol Crossover

Operational and Structural Aspects of a Vapor-Feed Semi-Passive Direct Methanol Fuel Cell Supplied with Concentrated Methanol

Experimental investigation of the dynamic performance of a microdirect methanol fuel cell stack for practical applications

Capillary-based Water Removal Cathode for an Air-Breathing Micro Direct Methanol Fuel Cell

Design, Fabrication and Testing of a Silicon-Based Air-Breathing Micro Direct Methanol Fuel Cell

Anode Flow Field Structures of Micro Direct Methanol Fuel Cell

A breakthrough in the performance and fuel utilization of methanol microfluidic fuel cell via viscous co-flow electrolyte

Development of an air-breathing direct methanol fuel cell with the cathode shutter current collectors

A Water Collecting and Recycling Structure for Silicon-Based Micro Direct Methanol Fuel Cells

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells