Abstract:Single-domain Y–Ba–Cu–O (YBCO) bulk superconductors can be widely used in the superconducting maglev, cryomagnets, motors/generators fields. In order to improve the performance of the YBCO bulk superconductors further, in this article, nano-CeO2 doped YBCO bulk superconductors were fabricated by two infiltration growth techniques (011-IG and 211-IG) respectively, in which two solid pellets of compositions Y2O3+1.15BaCuO2+0.1CuO+1wt.% nano-CeO2 and Y2BaCuO5 (Y-211)+1wt.% nano-CeO2 were employed. And a novel pit-type seeding mode was used to prevent the movement of the film seed during the heat treatment process, then the growth morphology, microstructure and superconducting properties of the samples were investigated. The results show that, at low doping level (1wt.%), the normal growth of the YBCO crystal is not affected, and fully-grown single-domain YBCO bulk superconductors can be successfully prepared by the two techniques. Furthermore, the positions of the seeds have no any movement, which proves the effectiveness of the new seeding mode. The perpendicular growth sector boundaries on the top surface of the samples and clear (00l) series X-ray diffraction (XRD) peaks both prove the high c-axis orientation and high growth quality of the samples. The scanning electron microscopy (SEM) results indicate that, the nano-CeO2 doping can effectively refine the size of the Y-211 micro-particles in the bulk superconductors, and this method is valid for both the two techniques. Low-temperature magnetization measurement shows that, the nano-CeO2 doped sample prepared by the 011-IG method displays obviously superior Jc property than the undoped sample at low fields, which indicates that the refined Y-211 particles can effectively enhance the δl-type pinning. In addition, compared with the 211-IG-processed sample, the 011-IG-processed sample performs better in the aspects of levitation force, microstructure and Jc property, thus the 011-IG method is a more promising preparation process. The results of this study are important for increasing the performance of the YBCO bulk superconductors as well as optimizing the fabrication technique further.

Fabrication of Single-Domain Gdbco Bulk Superconductors Using New Liquid Sources by the Top Seeded Infiltration and Growth Technique

Fabrication of Single-Domain Gdbco Bulk Superconductors Using A Novel Configuration

Fabrication and Superconducting Property of Large Single-Domain Gd–Ba–Cu–O Bulk Using Yb-based Liquid Source

Fabrication Method Improvement and Superconducting Property Investigation of Single Domain Gdbco Bulk Superconductors

Fabrication of Single-Grain GdBa 2 Cu 3 O 7− X Bulk Superconductors with a New Kind of Liquid Source by the Top Seeded Infiltration and Growth Technique

Fabrication of Large Gd–Ba–Cu–O Single Domains with Different Liquid Sources

Synthesis and Characterization of Large Single-Domain Gd–Ba–Cu–O Bulk Superconductor Material Using a Modified IG Process

A modified TSIG technique for simplifying the fabrication process of single-domain GdBCO bulks with a new kind of liquid source

A practical processing method for fabrication of single-domain YBCO superconductors using large-sized GdBCO seed crystals

A Novel Configuration for Infiltration and Growth of Single‐Domain Gd–Ba–Cu–O Bulk Superconductor

Essential role of liquid phase on melt-processed GdBCO single-grain superconductors

Improvements of Liquid Source for Infiltration and Growth of GdBa2Cu3O7−x Superconducting Single Grains

Effect of the Different Particle Sizes Gd_2Ba_4CuNbO_y Nanoparticles Doping on the Properties of GdBCO Bulk Superconductor

A new RE + 011 TSIG method for the fabrication of high quality and large size single domain YBCO bulk superconductors

Growth of single-grain GdBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-x</sub>superconductors by top seeded infiltration and growth technique

Fabrication and Properties of Nano-Ceo<sub>2</sub> Doped YBCO Bulk Superconductors

Effect of Gd2o3 Addition on the Superconductivity of Gd-Ba-Cu-O Bulk Superconductor Fabricated in Air

Flux Pinning Properties of Single-Grain Bulk GdBCO Superconductors Processed by Different Thicknesses of Y123 Liquid Source

Multi-seeded growth of melt processed Gd–Ba–Cu–O bulk superconductors using different arrangements of thin film seeds

Infiltration Growth and Crystallization Characterization of Single-Grain Y–Ba–Cu–O Bulk Superconductors

The effect of Gd_2Ba_4CuNbO_y doping on the properties of single domain GdBCO bulk superconductors