Abstract:The application requirements of high frame rate CMOS image sensors (CIS) in the industry have not been satisfied due to the speed limitations in traditional single-slope and serial two-step analog-to-digital converters (ADCs). In this paper, a high-speed fully differential two-step ADC design method for CIS was proposed. The proposed method was based on differential ramp and time-to-digital conversion (TDC) technology. A parallel conversion mode was formed that is different from serial conversion, and the robustness of the system was ensured due to the existence of differential ramps. Aiming at the inconsistency between traditional TDC technology and single-slope ADC, a TDC technology based on level coding was proposed. The proposed technology achieves the TDC in the last clock cycle of analog-to-digital conversion, and realized a two-step conversion process at another level. This paper presents a complete circuit design, layout design, and test verification of the proposed design method based on the 55 nm 1P4M CMOS experimental platform. Under the design environment of the analog voltage of 3.3 V, the digital voltage of 1.2 V, the clock frequency of 100 MHz, and a dynamic input range of 1.6 V, this design was a 12-bit ADC with a conversion time of 480 ns, column-level power consumption of 62 μW, differential nonlinearity (DNL) of +0.6/−0.6 LSB, and integral nonlinearity (INL) of +1.2/−1.4 LSB. Furthermore, it achieved a signal-to-noise distortion ratio (SNDR) of 70.08 dB. The proposed design provided a large area array with a high frame rate, and compared with the existing advanced single-slope ADC, its conversion speed increased by more than 52%. It provides an effective solution for the implementation of high frame frequency CIS.

Design of High Speed Column-Parallel 10-Bit ADC

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

Design of a Novel 8-Bit 0.35-&Amp;#x00b5;m BiCMOS Pipelined ADC

A 14-Bit Column-Parallel Two-Step SA ADC with Digital Calibration Based on Scaled References and Redundancy for CMOS Image Sensors

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 10-bit 30-MS/s 50mW pipelined A/D converter

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A Gain-Adaptive Single-Slope ADC Employing Column Lateral Capacitors for CMOS Image Sensors

A 63.2μW 11-Bit Column Parallel Single-Slope ADC with Power Supply Noise Suppression for CMOS Image Sensors.

A 10bit 100MS/s pipelined ADC with an improved 1.5bit/stage architecture

High-Speed Fully Differential Two-Step ADC Design Method for CMOS Image Sensor

A 10 bit 100 MS/s Pipelined A/D Converter Implemented in Digital CMOS Process

A Low-Power Column-Parallel Gain-Adaptive Single-Slope ADC for CMOS Image Sensors

A 10BIT 30MSPS CMOS A/D Converter for High Performance Video Applications

A 14-Bit Two-Segment Column-Level ADC for Remote Sensing Imaging

A 10-Bit 120-Ms/s Pipelined ADC with Improved Switch and Layout Scaling Strategy

A 28.9–38.8 μW dual-mode 10-bit column parallel single-slope ADC with minimum voltage feedback for CMOS image sensors

A 1.8-V 14-bit inverter-based incremental ΣΔ ADC for CMOS image sensor.

A 2.72 μ s row conversion time 11‐bit column‐parallel single‐slope analog to digital converter with differential‐clocks‐assisted time to digital converter interpolation for complementary metal oxide semiconductors image sensor

Column-parallel Integrating ADCs for Infrared Image Sensor