Abstract:This study aims to investigate the deformation behavior of high‐strength titanium‐clad steel plate (TCSP) at different phase zones during thermal compression. It is believed that our study contributes to the literature by providing various characteristics that may inform the design of structures containing the aforementioned combination and contribute to basic research on the deformation behavior of the TCSP. This research involves conducting unidirectional axial thermal compression experiments on high‐strength titanium‐clad steel plates (TCSPs) at different temperatures and strain rates. Thermally compressed samples are evaluated for macromorphology, microstructure, macroscopic texture, and dislocation density. Deformation consistency is observed in α‐titanium under certain conditions, but not in β‐titanium. Pearlite is the main deformation microstructure near the steel interface, expanding with temperature. Striped grain clusters are observed in the α‐titanium near the interface, enhancing deformation uniformity; furthermore, the prevalence of striped grains increases with higher strain rates. However, dynamic recrystallization in β‐titanium hinderes deformation consistency. The fiber presence of texture //ND ensures consistent deformation consistency, whereas the plate texture {0001} <101 ̄ 0> in the α‐titanium encourages it. During the deformation process at a consistent rate of strain, it is observed that both matrices initially exhibit a rise, followed by a decline in dislocation density as the temperature increases, peaking at 850 °C. Dislocation density rises as strain rate increases, while temperature remaines constant. At temperatures exceeding 850 °C, bonding strengths decrease with deformation rate and remain comparable. Bonding strengths decreases at 800 °C due to intermetallic compound formation.

Study Of Deformation Mechanisms In Titanium By Interrupted Rolling And Channel Die Compression Tests

The Action Mechanism of Rolling Texture on the Anisotropic Behavior of a Pure Titanium Plate

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Effects of rolling deformation on microstructure orientations and tensile properties of TiB/(TA15-Si) composites

Study of Deformation Mechanisms of a High-Purity α-Titanium Plate Under Monotonic Loading with the EVPSC-TDT Model

Crystallography and microstructure of the deformation bands formed in a metastable β titanium alloy during isothermal compression

The Role of Nano-Scaled Structural Non-Uniformities on Deformation Twinning and Stress-Induced Transformation in a Cold Rolled Multifunctional Β-Titanium Alloy

Plastic Deformation Mechanism and Slip Transmission Behavior of Commercially Pure Ti during In Situ Tensile Deformation

Multiscale crystal plasticity finite element simulations of the deformation inhomogeneity of TiBw/TA15 composites with network-structured during hot rolling

Mechanism of Crystallographic Orientation and Texture Evolution of Ti60 Alloy during Plane Strain Compression

In situ EBSD study of the twinning deformation behaviors in pure titanium

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Texture evolution and slip mode of a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr dual-phase alloy during cold rolling based on multiscale crystal plasticity finite element model

Multi-scale characterization of deformation features and precipitation behavior in a near β-Ti alloy

Discontinuous dynamic recrystallization behavior and texture evolution of large-size pure titanium flat ingot via electron beam cold hearth melting during short process direct hot rolling

Deformation mechanisms in the α phase of the Ti-6Al-2Sn-4Zr-2Mo titanium alloy: in situ experiments and simulations

Microstructure Evolution and Deformation Behavior of High Strength Titanium Clad Steel Plate in the Thermal Compression

Influence of cold rolling deformation on mechanical properties and corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy

Indentation of Commercial Pure Titanium Processed by Cold Rolling

Effect of Deformation Temperature on the Microstructure and Texture Evolution of Ti-6Al-4Zr-2Mo-6V Alloy

Crystal Plasticity-Based Assessment of Constitutive Laws for Microstructure and Rolling Texture Capture in Ferritic Stainless Steel During Cold Rolling