Abstract:Reliability is essential for large-scale applications of high-power light-emitting diode (LED) devices, modules, and systems for general illumination. In this paper, the reliability of a novel application-specific LED package (ASLP) is investigated by thermal shock testing, failure analysis, and fluid-solid coupling thermo-mechanical simulation. The reliability of the ASLP modules was validated with a dual-bath liquid thermal shock testing from 233 to 398 K. The non-destructive failure analysis was conducted to the catastrophic failure ASLP samples by fluorescent penetrant inspection. The delaminations at the interfaces within the ASLP module were detected. The failure mechanisms were identified by digital optical microscopy and field emission scanning electron microscope inspection after the decapsulation. The experimental results show that fracture failure occurs at the wedge joint of the bonding wire, which leads to the catastrophic failure of the ASLP module. The stress and strain behaviors of the ASLP module, especially the bonding wire under thermal shock loading, were analyzed through thermo-mechanical modeling with the nonlinear time- and temperature-dependent material properties. Significant thermal gradient within the ASLP module during the thermal shock testing was taken into consideration by the fluid-solid coupling transient thermal transfer analysis. The effects of the delaminations detected by the fluorescent penetrant inspection on the reliability of the bonding wire were also examined. It is found the delaminations existing at the interfaces within the ASLP module induce significant plastic strain to the wedge joint and results in fracture failure. The results from the numerical simulation can make a good prediction of the failure mechanism of the ASLP modules under thermal shock loading.

An application specific LED packaging module integrated with optical, cooling and powering functions

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Design Of Compact Freeform Lens For Application Specific Light-Emitting Diode Packaging

Novel Application-Specific Led Packages Integrated With Compact Freeform Lens

Freeform lens for application-specific LED packaging

Novel application-specific LED packaging with compact freeform lens

Secondary light distribution design for LED street light

Reliability Test and Failure Analysis of High Power LED Packages

Optical design of rectangular illumination with freeform lenses for the application of LED road lighting

Study on the Reliability of Application-Specific LED Package by Thermal Shock Testing, Failure Analysis, and Fluid–Solid Coupling Thermo-Mechanical Simulation

Design and Optimization of Horizontally-Located Plate Fin Heat Sink for High Power Led Street Lamps

High-luminance and High-Efficiency Multi-Chip Light-Emitting Diode Array Packaging Platform with Nanoscale Anodized Aluminum Oxide on Silicon Substrate

A Novel Silicon-Based Packaging Platform for High-Efficiency LED Modules

Optical Design of a Street Lamp Based on Dual-Module Chip-on-board LED Arrays

Optical and Thermal Designs of LED Matrix Module Used in Automotive Headlamps

Optical design of a road lighting luminaire using a chip-on-board LED array

Optical Analysis of an 80-W Light-Emitting-Diode Street Lamp

Optical Characterization Of A Light Bulb With The Waffle Pack Led Wlp Module

Freeform Optics for LED Lighting with High Spatial Color Uniformity

Modular Design of a High-Efficiency LED Headlamp System Based on Freeform Reflectors

Design of high power LED lighting module and high efficiency heat dissipation structure