Abstract:Aero-engine nacelle acoustic liners are complex curved surface subassemblies with tens of thousands of dense acoustic holes for noise reduction. Traditional robotic drilling systems with a single spindle and conventional teaching programming cannot meet the high-quality and high-efficiency drilling requirements for nacelle acoustic liners. This paper developed a novel robotic multi-spindle drilling system, which integrates standard industrial robots with a multi-spindle drilling end-effector to drill acoustic holes on an acoustic liner. The task planning strategy and offline programming method are investigated for the robotic multi-spindle drilling of the acoustic liner. A dedicated offline programming software capable of quickly generating robotic machining programs has been designed and developed. A precise acoustic hole arrangement applicable to curved drilling zones is demonstrated. The virtual surrogate hole is introduced to target the array layout of the developed end-effector's multiple spindles. A virtual surrogate hole generation method is proposed based on the minimum mutually exclusive set cover and the greedy algorithm. After that, a virtual surrogate hole layout optimization method is developed using an adaptive genetic annealing algorithm. Then, the frame chain is constructed as the kinematic foundation in robotic multi-spindle drilling of a nacelle acoustic liner. The drilling pose planning of the multi-spindle end-effector based on normal vectors and coordinates of acoustic hole points covered by virtual surrogate holes is explored. And a multi-spindle drilling path planning algorithm is developed using the genetic algorithm. To drill the aero-engine nacelle of a large aircraft, an offline programming software for robotic multi-spindle drilling of the nacelle acoustic liner is developed by integrating the methods above. A case study of multi-spindle drilling task planning of a nacelle acoustic liner is carried out. The case study results indicate that, compared to traditional single-spindle robotic drilling systems, the developed multi-spindle drilling system increases drilling efficiency by approximately 347 %. Using the proposed multi-spindle drilling path optimization algorithm, the drilling path has been shortened by 84.8 %. These results validate the effectiveness of the proposed series of drilling task planning methods and the developed offline programming software, which significantly enhance drilling efficiency while meeting the technical requirements for drilling acoustic holes on the acoustic liner.

Design and simulation of a magnetic pulse automated drill and rivet system for big shell

Drilling Task Planning and Offline Programming of a Robotic Multi-Spindle Drilling System for Aero-Engine Nacelle Acoustic Liners

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

Experiment and Numerical Simulations of a Slug Rivet Installation Process Based on Different Modeling Methods

Dynamic Modeling and Sensitivity Analysis of Dual-Robot Pneumatic Riveting System for Fuselage Panel Assembly

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly

Automatic Stepping For Circumferential Splice Drilling In Aircraft Fuselage Assembly

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

Coordination error control for accurate positioning in movable robotic drilling

Linearity Hysteresis Model of Giant Magnetostrictive Components for Non-Cylindrical Hole Precision Machining

Kinematic Modeling and Base Frame Calibration of a Dual-Machine-based Drilling and Riveting System for Aircraft Panel Assembly

Design and Verification of Complex Intelligent Integrated Dual-robot Collaborative Drilling and Riveting System for Aircraft Assembly

Experimental Study of Automatic Rivet Feeding System of Robot Automatic Drilling & Riveting

An efficiency and quality based automatic drilling-riveting system for aero-structures assembly

Design of Automatic Mooring Chain Magnetic Powder Testing Device

A new flexible track automatic drilling system

A new type of inner-side working head for automatic drilling and riveting system