Abstract:We report here a generalized synthesis of various crystalline mesoporous metal oxides including CeO2, Cr2O3, Fe2O3, SnO2, Ce0.5Zr0.5O2, TiO2, Al2O3 and ZrO2 from the self-assembly of a basic poly 4-vinylpyridine (P4VP) template with various metal precursors based on their strong acid–base interaction under high temperature (180 °C) hydrothermal conditions. Using the typically crystalline mesoporous metal oxide of CeO2, after removing the template by calcination at 550 °C and loading with various transition metal oxides such as MnOx, various transition metal oxide functionalized crystalline mesoporous CeO2 (MnOx/P4VP–CeO2) were obtained. X-ray diffraction (XRD) patterns show that the resulting mesoporous metal oxides exhibit a high degree of crystallinity, and the transition metal oxides active sites have been successfully loaded into these samples. N2 sorption–desorption isotherms, SEM images show that the resulting crystalline mesoporous metal oxides, such as CeO2, have a large BET surface area (94 m2 g−1) and abundant mesopores, which exhibit monolithic morphology with crystal sizes ranging from 5 to 15 μm, giving a uniform pore size centered at 5 nm. XPS spectra show that the active sites such as MnOx exhibit the phases of MnO2 and Mn2O3 in P4VP–CeO2. H2-TPR curves show that MnOx/P4VP–CeO2 exhibits decreased reductive temperatures of both active sites of the MnOx and P4VP–CeO2 supporter when compared with the samples reported previously. More importantly, MnOx/P4VP–CeO2 exhibits much better catalytic activities and good recyclability for catalyzing the oxidation of benzene than that of MnOx loaded commercially crystalline CeO2, which will be very important for their wide applications for VOCs removal in industry.

Preparation and Soot Oxidation Activity of Transition Metal-Cerium Mixed Oxides

Soot Combustion Performance and H2-TPR Study on Ceria-Based Mixed Oxides

Oxygen Activation on Cu/Mn–Ce Mixed Oxides and the Role in Diesel Soot Oxidation

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Selective Oxidation of Soot over Cu Doped Ceria/ceria–zirconia Catalysts

Design Structure for Cepr Mixed Oxide Catalysts in Soot Combustion

A Comparative Study on Ce–Pr and Ce–Mn Mixed Oxide Catalysts Toward Soot Catalytic Combustion

Preparation of MnOx–CeO2–Al2O3 Mixed Oxides for NOx-assisted Soot Oxidation: Activity, Structure and Thermal Stability

Generalized and High Temperature Synthesis of a Series of Crystalline Mesoporous Metal Oxides Based Nanocomposites with Enhanced Catalytic Activities for Benzene Combustion

Synthesis of CeO2–MnOx Mixed Oxides and Catalytic Performance under Oxygen-Rich Condition

The Catalytic Activity of CuO–CeO2 Mixed Oxides for Diesel Soot Oxidation with a NO/O2 Mixture

Preparation of FexCe1-xOy Solid Solution and Its Application in Pd-only Three-Way Catalysts

Cerium Doping Effect in 3DOM Perovskite-Type La2−xCexCoNiO6 Catalysts for Boosting Soot Oxidation

Influence of Different Subsistence States of CeO2-ZrO2 Mixed Oxides in Catalyst Coating on Catalytic Properties

The Highly Active Catalysts of Nanometric CeO2-supported Cobalt Oxides for Soot Combustion

Controlled reaction depth by metal (M=Fe, Ni, Mn and Ti) doped ceria in selective oxidation of ethane with carbon dioxide

Study on the preparation and the properties of cobalt cerium mixed oxides catalysts with ultrafine particals

A comparison of NiO–CuO–CeO2 composite catalysts prepared via different methods for CO oxidation

Preparation of Ce 1− X Fe X O 2 Solid Solution and Its Catalytic Performance for Oxidation of CH 4 and CO

Textural–structural Properties and Soot Oxidation Activity of MnO -Ceo2 Mixed Oxides

Transition metal oxides (TMOs) supported on ordered mesoporous Ce0.1Mn0.9Oδ as high-efficient catalysts for toluene combustion