Abstract:KDP crystals constitute the only laser-frequency conversion and electro-optical switches that can be used in laser systems for inertial confinement fusion. However, KDP crystals are difficult to produce because of their inherent softness, brittleness, water-solubility, and temperature sensitivity. The authors’ group developed a water-dissolution polishing method in previous studies to obtain near-damage-free KDP surfaces. In this article, the effect of the wetting characteristics of the water dissolution polishing fluid on the crystal surface—a factor rarely considered in the usual process optimization—on the polished surface quality was comprehensively studied. The mean radius of micro water droplets at 5 wt.% and 7.5 wt.% water content was approximately 0.6 nm and 1.2 nm, respectively. Theoretically, the smaller micro water droplet size is beneficial to the polished surface quality. When the water content was 5 wt.%, due to the poor wetting characteristics of the polishing fluid, surface scratches appeared on the polished surface; when the water content was 7.5 wt.%, the effects of the wetting characteristics and the radius of the micro water droplets reached a balance, and the polished surface quality was the best (Ra 1.260 nm). These results confirm that the wetting characteristics of the polishing fluid constitute one of the key factors that must be considered. This study proves that the wetting characteristics of the polishing fluid should be improved during the optimization process of polishing fluid composition when using oil-based polishing fluids for ultra-precision polishing.

Continuous Filtration System for Rapid Growth and Quality Analysis of KDP Crystals

High‐laser‐damage‐threshold potassium dihydrogen phosphate crystals

Improvement of the bulk laser damage threshold of potassium dihydrogen phosphate crystals by reducing the organic impurities in growth solution

Rapid Growth of a Long-Seed KDP Crystal

Toward the Understanding of KDP Crystal Surface Height Variation by a Rapid Growth Technique

Ultra-Precision Cutting Mechanism of KDP Crystal in Microplastic Region via Heating Assistance

Numerical simulation of flow and mass transfer during the process of large-sized cuboid KDP crystals grown by the LSLM

Novel Magneto-Rheological Finishing Process of KDP Crystal by Controlling Fluid-Crystal Temperature Difference to Restrain Deliquescence

Mitigation of Subsurface Damage in Potassium Dihydrogen Phosphate (KDP) Crystals with a Novel Abrasive-Free Jet Process

An Investigation on the Material Removal Mechanism of Abrasive-Free Jet Polishing for KDP Crystal

Effect of Wetting Characteristics of Polishing Fluid on the Quality of Water-Dissolution Polishing of KDP Crystals

On the Ultra-Precision Fabrication of Damage-Free Optical KDP Components: Mechanisms and Problems

Development of Optimal Mitigation Contours and Their Machining Flow by Micro-Milling to Improve the Laser Damage Resistance of KDP Crystal

Cylindrical Spreading of KDP Single Crystal by Method of Vaporization

Droplet Microfluidics XRD Identifies Effective Nucleating Agents for Calcium Carbonate

Rapid Growth of a Cuboid DKDP (kdxh2–xpo4) Crystal

Investigation and Analysis of Pin-Point Damage and Damage Growth Characteristics in KDP and DKDP Crystals.

Surface damage evolution of KDP crystals induced by conical cracks under irradiation of nanosecond laser

Microprobe of structure of crystal/liquid interface boundary layers

Combining laser-induced fluorescence and light-scattering microscopies to diagnose low-fluence damage precursors on KDP-based crystal surface

Effect of UV Laser Conditioning on the Structure of KDP Crystal