Abstract:As optical networks advance toward a dynamic multiwavelength all-optical structure, all optical wavelength conversion technologies become vital in the efficient utility of available fiber bandwidth. Experimental demonstrations of optical wavelength conversion usually involves a nonlinear element to transfer the information from the signal wavelength to that of a local laser source. In the case of Non-return-to-zero (NRZ) signals, the local laser source is usually a CW narrow linewidth semiconductor laser. For Return to Zero (RZ) signals, the local laser sources commonly employ a modelocked fiber laser or a modelocked semiconductor laser or a gain switched DFB to generate low jitter optical clock. Various materials and devices can be used as the nonlinear element for wavelength conversion, with the two most common being the optical fiber and semiconductor optical amplifier, though Lithium Niobate has also attracted attention in recent years as a switching element. The advantage of using optical fiber for wavelength conversion is that it is relatively cheap and has low levels of noise. However, the switching energy required to generate the nonlinearity in optical fiber is high compared to that of the SOA [1]. Wavelength conversion using SOA typically uses either four-wave mixing or crosses gain/phase modulation, with the latter method often used in conjunction with an interferometric topology [2]. The advantages of cross phase modulation of SOA in interferometers are the relatively low switching energy required, the fast switching speed, and the ability to integrate the whole structure on a single substrate.

All-optical wavelength conversion of nonreturn-to-zero signals based on a nonlinear polarization switch and a delayed interferometer

All-Optical Wavelength Conversion Based On A Modified Nonlinear Polarization Switch

A NRZ wavelength converter based on a nonlinear polarization switch cascading a reshaping delayed interferometer

Optical Signal Processing Based on Semiconductor Optical Amplifier and Tunable Delay Interferometer

All-Optical Wavelength Conversion Using Optical Injection Induced Wavelength Switching In V-Cavity Laser

All-Optical Wavelength Conversion Based on Tunable V-Cavity Laser

All-Optical Wavelength Conversion Using Widely Tunable V-Cavity Semiconductor Laser

Investigation of all-optical nonreturn-to-zero-to-returnto-zero format converter based on a semiconductor optical amplifier and a reconfigurable delayed interferometer

All-Optical regenerative wavelength conversion based on a modified delayed interference signal wavelength converter

All-Optical Wavelength Converter For Pol-Mux Qpsk Signals Based On A Single Silicon Waveguide

All-Optical Nrz-Ook to Bpsk Format Conversion in an Soa-Based Nonlinear Polarization Switch

All-optical Tunable Wavelength Conversion Based on Cross-Polarisation Modulation in Nonlinear Photonics Crystal Fibre

All-optical NRZ Wavelength Conversion Based on a Single Hybrid III-V/Si SOA and Optical Filtering.

SIMULTANEOUS CONVERSION FOR THE CONTINUE WAVEFORM TO RETURN-TO-ZERO OPTICAL PULSE AND WAVELENGTH BASED ON NOLM

Wavelength Conversion Using SOAs: Simulations and Experiment

A Simple All-Optical Wavelength Converter Based on Cascaded Highly Nonlinear Fibers with High Conversion-Efficiency

All-Optical Switch Based on Two-Pump Four-Wave Mixing in Fibers Without A Frequency Shift

Simultaneous All‐optical Amplification, Inversion and Format Conversion Based on Self‐induced Nonlinear Effects in a Semiconductor Optical Amplifier

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

All-Optical Data Format Conversion Between Rz and Nrz Based on Wavelength Converter

All-Optical Wavelength Conversion and Multichannel 2r Regeneration Based on Highly Nonlinear Dispersion-Imbalanced Loop Mirror