Abstract:Abstract In this research, phosphogypsum composite cementing material using phosphogypsum powder, slag powder, fly ash and cement were prepared as the main cementing materials, and sodium silicate was used as the activator. The influence of the cement content of 0 wt.%, 5 wt.%, 10 wt.%, 15 wt.% and the change of 0%, 2%, 4% alkali equivalent on the mechanical properties of cementing materials was studied, the types and content of admixtures suitable for phosphogypsum cementitious materials were also studied. The cost of the materials used was calculated and analyzed. The results showed the increase in cement content and alkali equivalent will improve the mechanical properties of the cementitious material, and the strength can reach 23.0 MPa; the change of alkali equivalent had a more obvious impact on the early (1 d) mechanical properties of the cementitious material than cement; when these two factors synergistically worked, the cement content should not exceed 10 wt.%, or the mechanical properties of the material would decline; the effect of using the naphthalene-based water-reducing agent was better than that of the polycarboxylic acid water-reducing agent, and when cement, sodium silicate and naphthalene water reducer were used together, the maximum compressive strength of 7 d reached 24.4 MPa, which was higher than 39.4% of the sample without water reducer. The ratio used in the experiment was relatively low cost, which had a great reference value for the comprehensive utilization of industrial by-product phosphogypsum.

Preparation Study on the Novel Zinc-Aluminium Phosphate Cementitious Material

Preparation and Properties of Phosphate Base Heat- Resisting Composites

Experimental Research on Properties and Microstructures of Magnesium-Iron Phosphate Cement

Investigations on the Preparation and Mechanical Properties of the Nano-Alumina Reinforced Cement Composite

Controllable Preparation of Zinc Phosphate Materials with Different Morphologies and Particle Size

Preparation and Characterization of Magnetite-Based Iron Phosphate Cement

Study on Performance of Magnesium Phosphate Cement

Preparation of Porous Materials by Magnesium Phosphate Cement with High Permeability

A novel iron phosphate cement derived from copper smelting slag and its early age hydration mechanism

Preparation of a novel calcium phosphate cement using N-methylene phosphonic chitosan as a gelling agent

Laboratory-scale Preparation of Zinc Phosphate

Study on the mechanical properties of phosphogypsum composite cementing materials based on alkali excitation

Study on B-Al-Mg Compound Phosphate Binder by Orthogonal Test Method

Preparation of acid aluminum phosphate solutions for metakaolin phosphate geopolymer binder

Phase Compositions and Pore Structure of Phosphate Modified Calcium Aluminate Cement Hardened Pastes with Varied Dosages of Sodium Polyphosphate

Research on Preparation and Properties of Carbon Fiber Reinforced Zinc-Based Aluminum Rich Alloy Composite

Preparation and Characteristics of Porous Magnesium Phosphate Cement Modified by Diatomite

Optimizing the manufacturing technology of high-strength fiber reinforced composites based on aluminophosphates

Preparation of high-performance silico-aluminophosphate geopolymers using fly ash and metakaolin as raw materials

One-Step Preparation and Characterization of Zinc Phosphate Nanocrystals with Modified Surface

Research on New Al-Mg-B Compound Phosphate Inorganic Binder for Heat Cured Sand