Abstract:This study attempts to clarify the correlation between the structural parameters of vortex finders (diameter ratio and insertion depth) and the strong turbulent flow field and performance of cyclone separators. To elucidate the effects due to the overflow pipe diameter, insertion depth, and Reynolds number on the tangential velocity index (n) and separation efficiency, 0.3D, 0.4D, 0.5D, 0.6D, and 0.7D (where D is the diameter of the cyclone separator’s cylindrical section) were selected as the vortex finder diameter and insertion depth, which were studied using three methods: computational fluid dynamics (CFD) software Fluent, experiments, and artificial neural network simulations. With Fluent, the Reynolds stress model (RSM) of turbulence was adopted to describe transport equations, and the discrete phase model (DPM) for two-phase flow was used to calculate the efficiency and separate particles at different inlet velocities. Experiments were conducted to measure the operational pressure drop and separation efficiency of the system; subsequently, the results were used to validate the CFD calculation results. Finally, a 5–5-1 three-layer artificial neural network was established based on 336 sets of data for values of n obtained from numerical simulations. In addition, a backpropagation (BP) artificial neural network model was employed to predict the correlation between the structural and operational parameters of the cyclone separator and n values. The obtained results indicate that the BP artificial neural network can accurately predict the distribution of n values within the flow field of the cyclone. Increasing the diameter of the vortex finder with the same inlet velocity can reduce the total pressure drop due to the cyclone, thereby reducing the kinetic energy loss and improving the separation efficiency of fine particles. Increasing the insertion depth of the vortex finder leads to an increase in the values of n. Considering the stability of the flow field structure and energy dissipation, an S/D value between 0.5 and 0.6 is preferred.

A Study on Separation Performance of a Vortex Finder in a Liquid-Liquid Cylindrical Cyclone

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Oil-water separation in a cylindrical cyclone with vortex finder

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Oil/Water Separation in a Liquid-Liquid Cylindrical Cyclone

Study on Separation Performance of Tri-Cone Water Medium Cyclone Based on CFD

Numerical Simulation on Structure Optimization of Liquid-Gas Cylindrical Cyclone Separator

Separation performance of hydrocyclone oil removal device influenced by oil droplet trajectory and oil drop characteristics

Numerical Study of Gas-Solid Flow in a Square Cyclone Separator with Different Vortex Finders

Optimizing the Inlet Design of A Liquid-liquid Cylindrical Cyclone

Multi-objective optimization of a novel vortex finder for performance improvement of cyclone separator

A Numerical Approach to Characterize the Efficiency of Cyclone Separator

Numerical Study on Oil and Water Two-Phase Flow in A Cylindrical Cyclone

Simulation and experimental study of effect of vortex finder structural parameters on cyclone separator performance

Numerical Analysis of Flow Characteristics of Upper Swirling Liquid Film Based on the Eulerian Wall Film Model

Numerical analysis of a novel cascading gas-liquid cyclone separator

Effects of different oil return pipe locations on the vortex characteristics of a cylindrical cyclone separator

Experimental investigation on separation characteristics of axial cyclone separator

Double-Eccentric Design for the Vortex Finder of a Cyclone Separator

Experimental study on the separation performance of a novel oil–gas cyclone separator

Design and performance study of a two-stage inline gas-liquid cyclone separator with large range of inlet gas volume fraction