Abstract:Purpose This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S 11 /S 22 ≤ 10 dB), transmission coefficient/insertion loss (IL) (S 12 /S 21 : 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices. Design/methodology/approach Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency. Findings Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end. Practical implications The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory. Originality/value The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

A Planar Magic-T Structure Using Substrate Integrated Circuits Concept

A Novel Hybrid Planar SIW Magic Tee and Monopulse Antenna

A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

A Novel Dieletric Slot Stripline Structure for Millimeter Wave Flexible Printed Circuit

A Novel Ltcc Multilayer Siw Linear Phase Filter

Substrate Integrated Waveguide Based Class‐f Power Amplifier

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Design of multilayer triangular substrate integrated waveguide filter in LTCC

Design of High Isolated Ka Band Planar Magic-T

The Design Of T-Septum Substrate Integrated Waveguide With An Ultra-Wideband Monomode

An x‐band coplanar magic‐T with high power handing

A 3-D Printed $E$ -Plane Waveguide Magic-T Using Air-Filled Coax-to-Waveguide Transitions

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

A design of K band E-plane folded magic tee matched in two ways for spatial power combining

Novel Four-Way Multilayer SIW Power Divider with Slot Coupling Structure

Resonance Property of a Novel Vertical Substrate Integrated Waveguide

Three-Dimensional Interconnection With Magnetically Coupled Transition for W-Band Integration Applications

Design of Multi-bit Reflective Metasurface Element Based on SP4T RF Switch

A Design Method of an Ultra-Wideband and Easy-to-Array Magic-T: A 6-14 GHz Scaled Model for a mm/submm Camera

Aerodynamic slotted SIW-to-MS line transition using mitered end taper for satellite and RADAR communications