Abstract:This paper presents an event-triggered model predictive control (MPC) strategy with learning terminal cost for robotic manipulators containing model uncertainty and input constraints. In the proposed MPC structure, an adaptive predictive model for the robotic system is established by radial basis function neural networks (RBFNNs) firstly. Then, a terminal cost adjusted by the global learning mechanism is constructed. Both global steady-state optimization and transient fast convergence are achieved by adding the learning terminal cost to the MPC scheme. After that, a triggering condition of the MPC solving is developed based on the predictive model’s weights and the predictive tracking error. Besides, the condition to avoid Zeno behavior is obtained. The recursive feasibility of the proposed MPC strategy is verified, and the ultimately uniformly boundedness (UUB) of all variables is proved according to the Lyapunov theorem. Finally, experiments based on an xMate7 Pro robot are conducted to demonstrate the effectiveness of the presented method. Note to Practitioners—The tracking control of robotic manipulators is a common and important problem in industrial applications, such as grasping, loading, unloading, et al. There exist some limitations in existing control methods. For example, general control strategies such as adaptive control, sliding mode control neglect the balance between control costs and expected performance; existing optimal control approaches rarely consider global steady-state optimization and transient fast convergence under the influence of model uncertainty. This paper is motivated by these limitations of robotic control design and inspired by model predictive control and optimal control theory. It develops a novel strategy for tracking control of robotic manipulators, which includes three following items: (1) adopt an approximation model constructed by neural networks as the predictive model for estimating the robotic system; (2) introduce a critic network into the terminal cost of the objective function of MPC for learning global optimal solution; (3) establish an event-triggered mechanism for solving of the optimization problem. The proposed method is verified by experimental results. In our future work, the proposed control strategy will be applied to more industrial processes.

Getting a Suitable Terminal Cost and Maximizing the Terminal Region for MPC

A Pragmatic Approach for Assessing the Economic Performance of Model Predictive Control Systems and Its Industrial Application

Maximal Terminal Region Approach for MPC Using Subsets Sequence

A Pragmatic Approach For Selecting Weight Matrix Coefficients In Model Predictive Control Algorithm And Its Application

A Low-Cost Pole-Placement MPC Algorithm for Controlling Complex Dynamic Systems

Multivariable Model Predictive Control for Integrating Processes with Input Constraints

Using subset sequence to approach the maximal terminal region for model predictive control

Toward a low cost and high performance MPC: The role of system identification

Get the design right, the rest is automatic: Towards an adaptive MPC controller

An Improved Model Predictive Control Approach Based on Extended Non-Minimal State Space Formulation

Stabilizing Terminal Constraint-Free Nonlinear MPC Via Sliding Mode-Based Terminal Cost

Model Predictive Control of a Solar Power System with Microturbine and Thermochemical Energy Storage

Predictive Control with Learning-Based Terminal Costs Using Approximate Value Iteration

Stable MPC with maximal terminal sets and quadratic terminal costs

Learning Convex Terminal Costs for Complexity Reduction in MPC

On the Stability of Constrained MPC Without Terminal Constraint

Tracking of Uncertain Robotic Manipulators Using Event-Triggered Model Predictive Control With Learning Terminal Cost

On performance bound estimation in NMPC with time-varying terminal cost

Robustly Stable Model Predictive Control Based on Parallel Support Vector Machines with Linear Kernel

Stability of Finite Receding Horizon Control: A Complementary Approach

Model Predictive Control of a Twelve-Phase PMSM with Simplified Cost Function