Wind Tunnel Test Study on Wind Load Characteristics for Double-Skin Facade Building with Rectangular Shape
Lou Wenjuan,JIN Hu,CHEN Yong,CAO Liyong,YAO Jingxiang
DOI: https://doi.org/10.3321/j.issn:1000-6869.2005.01.010
2005-01-01
Abstract:The double skin facades are applied to multistory office building gradually as people require energy saving and ecotype. For the building with double skin facades, there are three surfaces subjected to wind pressure due to the airflow between the double facades: those are the outside and inside surfaces of the external skin facade and the outside surface of the internal skin facade. Consequently, the wind loads acting on the double skin facades become complicated and can not be obtained from code. In this paper, wind tunnel tests on a double skin facade building in Hangzhou were carried out to study the wind pressure distribution on each surface of the double skin facades. Furthermore, the characteristic of the wind pressure distribution on the long span canopy was also obtained from the tests. When wind is blowing from the side of canopy, the wind load acting on the upper and lower surfaces of the canopy is almost the same as that of the ordinary roof canopy. When wind load is blowing in front of the canopy, positive pressure will appear on the upper surface of the canopy. The structural shape factors of wind load for the building with large length width ratio are compared with those from the Loading Code for Building Structures (GB 50009—2001) for square building. It was found when the wind is blowing along the length of the rectangular building, the shape coefficients given for the square building in the code can also be used in designing rectangular building; while the wind is blowing along the width of the rectangular building,the negative pressure on both sides of the building as well as on the leeward side of the building will be much more larger than those of the square building.