Abstract:Complex parallel fluid-conveying pipes system may suffer from external excitation interference at local locations, and this interference signal will be transmitted to the target position along different paths, which involves the transmission of vibration. However, the vibration transmission characteristics analysis of the parallel pipes system has been rarely incorporated in the open research of the fluid-conveying pipe. Therefore, based on the improved transfer matrix method (ITMM) and power flow analysis, a vibration transmission model for the parallel fluid-conveying pipes system is developed for the first time. The developed model has natural advantages of simple operation and high computational efficiency in evaluating the vibration transmission characteristics of parallel fluid-conveying pipes since the power flow signals containing velocity and force information are well-matched with the state vector of the proposed model. Based on the proposed model, numerical and experimental methods are respectively utilized to investigate the vibration transmission characteristics from four different positions to the target position of the system, and the main transfer path is identified by collecting the power flow signal during the vibration transmission process. It is shown that the numerical results are basically consistent with the experimental results. Finally, the effects of clamp damping, fluid velocity, and pressure on vibration transmission characteristics of the parallel fluid-conveying pipes system are analyzed. The developed model can be more targeted to find the path that needs to reduce vibration in the parallel fluid-conveying pipes system, which provides a premise for the subsequent implementation of vibration reduction designs.

Study of transmission paths in a flexible system based on power flow

POWER TRANSMISSION CHARACTERISTICS OF A FLEXIBLE PASSIVE ISOLATING SYSTEM

Research on Voltage Stability of HVDC Receiving-end System Based on Power Limit Trajectory

Study on Power Flow Characteristics of the System with Rotating Substructure

Study on power flow characteristics of isolation system based on flexible foundation

MODELING AND SIMULATION OF ACTIVE-PASSIVE VIBRATION ISOLATION OF MACHINERY WITH FLEXIBLE BASE

Modelling and Benefit Evaluation of Flexible Space of Transmission Operation in Power System

Study of Ground Vibration from Trains Caused by Track Irregularities

Study on Multi-Dimensional Vibration Transmission Performance Based on Vibration Power Flow Calculation with Norton Equivalent System

Active Control of Power Flow Transmission in Finite Connected Plate

Vibration transmission characteristics analysis of the parallel fluid-conveying pipes system: Numerical and experimental studies

Analysis of Vibration Power Flow from a Vibrating Machinery to a Floating Elastic Panel

Vibration Transmission Control of a Flexible Shaft-Bearing System Using Active/passive Support

A simple wave/power flow analysis method for vibration control of large cable-frame structures

Analysis and Study of Flexible DC Transmission Technology

Research on Using Flexibility Resources to Accommodate Uncertainty in Extension Planning of Transmission System

Study on the oscillation transmission paths in direct‐drive wind farm transmitted via flexible dc system based on dynamic energy flow

Structural Flexibility Effect on Spaceborne Solar Observation System's Micro-Vibration Response

Dynamics and power flow control of irregular elastic coupled plate systems: Precise modeling and experimental validation

Modeling and stability prediction for the static-power-converters interfaced flexible AC traction power supply system with power sharing scheme

Free Vibration Analysis of Transmission Lines Based on the Dynamic Stiffness Method.