Abstract:A novel zwitterionic quaternary copolymer of AA/AM/AOS/C16‐DMAAC A novel quaternary copolymer of AA/AM/AOS/C16‐DMAAC was synthesized with acrylic acid (AA), acrylamide (AM), sodium α‐alkenyl‐sulfonate (AOS), and dimethyl‐hexadecyl‐allyl‐ammonium chloride (C16‐DMAAC), using ammonium persulfate and sodium bisulfate (NH4)2S2O8‐NaHSO3) as initiators. The structure of AA/AM/AOS/C16‐DMAAC was characterized using Fourier transform infrared spectroscopy and nuclear magnetic resonance hydrogen spectroscopy. It can be found that the thickening capacity, shearing resistance, temperature‐resistance, salt‐resistance, and emulsification properties of AA/AM/AOS/C16‐DMAAC were superior to those of most widely and cost‐effective partially hydrolyzed polyacrylamide (HPAM) solution at the same concentration. Specifically, the viscosity retention rate of AA/AM/AOS/C16‐DMAAC (3000 mg/L) solution was 86%, which was better than that of HPAM solution (52%) after 30 s of mechanical shearing at 28000 r/min. In addition, the enhanced oil recovery of AA/AM/AOS/C16‐DMAAC solution was 16% at 65 °C, which was about 1.5 times higher than that of HPAM solution (11%). Significantly, successful synthesis of zwitterionic quaternary copolymer emphasizes the importance of a systematic approach to designing appropriate copolymers for enhanced oil recovery. Highlights A novel zwitterionic quaternary copolymer of AA/AM/AOS/C16‐DMAAC was successfully synthesized. The performance on thickening capacity, shearing resistance, temperature‐resistance, salt‐resistance, and emulsification properties of AA/AM/AOS/C16‐DMAAC was superior to that of the most widely used partially hydrolyzed polyacrylamide (HPAM). The enhanced oil recovery of AA/AM/AOS/C16‐DMAAC (16%) was about 1.5 times higher than that of HPAM (11%).

Grafting copolymerization onto LDHs within W/O polyhedral cell

Poly(L-Lactide)/Layered Double Hydroxides Nanocomposites: Preparation and Crystallization Behavior

Synthesis of Stable W/O Microemulsions of a Hybrid Grafted Copolymer Using a New Inorganic Cationic Backbone Within a Unique “polyhedral Cell”

Preparation of hybrid cationic graft hydrotalcite and application in sludge-dewatering

Synthesis and characterization of hydrophobically associating cationic polyacrylamide

SYNTHESIS AND CHARACTERIZATION OF THE GRAFT COPOLYMERS OF CARBOXYMETHYLCELLULOSE WITH ACRYLAMIDE AND DIALLYLLAURYLAMINE

Polymer-Layered Double Hydroxide Nanocomposites By Emulsion And Suspension Polymerization

Grafting polyelectrolytes onto polyacrylamide for flocculation 1. Polymer synthesis and characterization

Synthesis and performance evaluation of a novel zwitterionic quaternary copolymer for enhanced oil‐recovery application

Graft copolymerization of oleic acid onto low-density polyethylene in the molten state

Preparation of Acrylic Acid and AMPS Cointercalated Layered Double Hydroxide and Its Application for Superabsorbent

Effect of hydrophobic group on flocculation properties and dewatering efficiency of cationic acrylamide copolymers

Copolymerization behavior of diallyldimethylammonium chloride‐nonionic macromonomer in water‐ether mixture solution and flotation performance of the copolymer for treating oily wastewater

Synthesis and application of amphiphilic copolymer as demulsifier for super heavy oil emulsions

Using ultrasonic (US)-initiated template copolymerization for preparation of an enhanced cationic polyacrylamide (CPAM) and its application in sludge dewatering

A Hydroxypropyl Methyl Cellulose-Based Graft Copolymer with Excellent Thermothickening and Anti-salt Ability for Enhanced Oil Recovery

Synthesis of cationic polyacrylamide via inverse emulsion polymerization method for the application in water treatment

Preparation of Waterborne Hyperbranched Polyurethane Acrylate/ldh Nanocomposite

Preparation of acrylate-modified cationic flocculant by polymer reaction and its performance in treating oilfield-produced water

Enhancing Oil Recovery in Low-Permeability Reservoirs Using a Low-Molecular Weight Amphiphilic Polymer

Hydrophobic modification of cationic microblocked polyacrylamide and its enhanced flocculation performance for oily wastewater treatment