Abstract:with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene;The appearance of nitrogen oxide compounds during steam regeneration makes the regeneration temperature not too high.We derive the kinetics of steam regeneration and obtain an activation energy of about 177.8 kJ/mol during the steam regeneration process.Compared with the air combustion process, the steam regeneration process is more difficult to occur.Methanol-to-olefins (MTO) is industrially applied to produce ethylene and propylene using methanol converted from coal, synthetic gas, and biomass. SAPO-34 zeolites, as the most efficient catalyst in MTO process, are subject to the rapid deactivation due to coke deposition. Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process, compared to that by air regeneration. A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work. In doing so, we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure, acidity, residual coke properties and other structural parameters. The results show that with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene, which are normally considered as active hydrocarbon pool species in MTO reaction. However, when the regeneration temperature is too high, nitrogen oxides can be found in the residual coke. Meanwhile, as the regeneration temperature increases, the quantity of residual coke reduces and the acidity, BET surface area and pore structure of the regenerated samples can be better recovered, resulting in prolonging catalyst lifetime. We have further derived the kinetics of steam regeneration, and obtained an activation energy of about 177.8 kJ·mol−1. Compared that with air regeneration, the activation energy of steam regeneration is higher, indicating that the steam regeneration process is more difficult to occur.© 2020 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd.. All rights reserved.

The weight change of SAPO-34 catalyst during MTO process in TGA reactor

Characteristics of Coke Deposition over A Sapo-34 Catalyst in the Methanol-To-Olefins Reaction

Study of Coke Behaviour of Catalyst During Methanol-to-olefins Process Based on a Special TGA Reactor

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Reaction and Deactivation Kinetics of Methanol-To-Olefins Process Based on A Special Tga Reactor

TGA-MS study oncracking of the coke deposited on catalyst for MTO Reaction

Methanol to Olefins (MTO) Reaction over SAPO-34 Catalyst——Deactivation Kinetics of Catalytic Reaction

Catalytic Properties and Reaction Behaviors of ZSM-5 Catalysts in Different MTP Reaction-Regeneration Cycles

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method

Stabilizing the framework of SAPO-34 zeolite toward long-term methanol-to-olefins conversion

Study on Carbon Deposition on SAPO-34 Molecular Sieve Catalyst in Transformation of Methanol to Olefins

Kinetics of steam regeneration of SAPO-34 zeolite catalyst in methanol-to-olefins (MTO) process

Synthesis of SAPO-34 with Small and Tunable Crystallite Size by Two-Step Hydrothermal Crystallization and Its Catalytic Performance for MTO Reaction

Synthesis and In Situ Modification of Hierarchical SAPO-34 by PEG with Different Molecular Weights; Application in MTO Process

In Situ Synthesis of SAPO-34 Grown Onto Fully Calcined Kaolin Microspheres and Its Catalytic Properties for the MTO Reaction

Behaviors of Coke Deposition on SAPO-34 Catalyst During Methanol Conversion to Light Olefins

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

Methanol Conversion on SAPO-34 Catalysts Synthesized by Tri-templates

The Synthesis of SAPO-34 with Mixed Template and Its Catalytic Performance for Methanol to Olefins Reaction

Synthesis Optimization of SAPO-34 in the Presence of Mixed Template for MTO Process

Synthesis of SAPO-34 catalysts via sonochemically prepared method and its catalytic performance in methanol conversion to light olefins